ANCEL BA101 - battery tester for 8-30 V DC vehicle systems, performing battery, starting and charging system checks. It measures 100-2,000 CCA and 30-220 Ah, and the data can be printed via USB connection.
UNI-T UT116A red and gray SMD component tester measures resistance up to 30 MΩ, capacitance up to 30 mF and voltage up to 36 V DC, as well as checks diodes, LEDs and circuit integrity. 180° rotating probe, automatic measurement range selection, 39 × 20 mm display and a body weighing only 80 g...
NIIMBOT TL-80m - 80 m of white heat shrink tubing for C1 printer. The 1.5 mm² cross-section tubing is suitable for cables with an outer diameter of 3.2-3.4 mm and, when shrunk, forms a durable cable marking.
HPE Networking Instant On AP25 Flush Mount Sleeve
HPE Aruba Networking CX 5420 24p SFP 1G Module
HPE Aruba Networking 25G SR SFP28 LC 100m MMF C-Class Transceiver, SFP28, SFP28
HP Poly Edge E300 IP Phone and PoE-enabled, IP Phone, Black, Wired handset, 8 lines, IPS, 8.89 cm (3.5")
FOSSIBOT XT90-MC4 solar cable with MC4 and XT90 connectors for FOSSiBOT F2400 and F3600 Pro power stations. The 5 m long black cable allows for flexible placement of solar panels.
FNIRSI FNB48P BT - "Bluetooth" USB power tester for measuring voltage, current, power, cable resistance, capacitance and energy via USB-A, USB-C and "Micro USB" connectors. The device supports popular fast charging protocols, saves measurement data, displays graphs on a 1.77 inch. screen and...
FNIRSI FNB58 - black USB port tester with 2-inch LCD screen for measuring voltage, current, power, ripple and charging curves. It supports USB-A, USB-C and Micro USB connectors, PD 2.0/3.0/3.1, PPS, QC and other fast charging protocols, as well as E-Marker cable detection and up to 9 hours of...
FNIRSI FNB-C2 - USB power tester that measures voltage, current, power, capacity, energy, and charging protocols up to 50 V, 6.5 A, and 240 W. The device reads the E-Marker data of the USB-C cable, analyzes the waveform and pulsations, records data, and has a 1.54-inch color display.
UNI-T The UT116C red and gray SMD component tester measures resistance, capacitance, diodes, up to 36 V DC voltage, and circuit integrity. Automatic component recognition, a 6,000-count display, and a compact 204 mm housing make electronics testing easy.
FNIRSI DSO-TC3 - a handheld device that combines a digital oscilloscope, transistor and component tester, and signal generator, with a 2.4-inch color display. It features a 10 MS/s sampling rate, 500 kHz bandwidth, six signal types, USB-C charging, and a built-in 1,500 mAh battery.
FNIRSI FNB58 BT USB port tester measures voltage, current, power, ripple and charging curves, supports PD3.1, PPS, QC and other fast charging protocols. Equipped with a 2-inch LCD display, USB-A, USB-C and Micro USB connectors, cable diagnostic function, up to 9 hours of offline data recording...
FNIRSI BTM-24 - 12 V / 24 V automotive battery and charging system tester, measuring voltage, starting current up to 2,000 A, charge and condition level, internal resistance, starting characteristics and generator operation. The device supports CCA, EN, DIN, IEC, JIS and GB standards, is suitable...
Bluetooth battery tester for 6-20V DC systems and compatible with 12V car, truck and motorcycle batteries. Connects to Android or iOS devices via Bluetooth 4.0 to monitor voltage, check battery and charging, perform engine cranking tests and log trips.
The battery-powered, wired water leak detector detects drips, leaks, flooding and water levels. It connects via 2.4 GHz Wi-Fi and Bluetooth, is IP67-rated, and notifies you via app, email, sound or Alexa - no hub required.
The Habotest HT61 mini gas leak detector detects a variety of flammable gases with a sensitivity of less than 50 PPM and an accuracy of ±10% FS for methane. It features a dual warning system with visual and audible signals, and a response time of less than 2 seconds.
FNIRSI GC-01 is a Geiger counter designed for real-time monitoring of ionizing radiation, including beta, gamma and X-rays. It features a large LCD display, multiple measurement units and an alarm function to detect radiation levels in a variety of environments.
Habotest The HT60 gas leak detector detects combustible gases such as methane, propane, butane and carbon monoxide with a sensitivity of less than 50 PPM. The device has a dual alarm system with visual, audible and vibration alerts, and measurements are accurate, responding in less than 2 seconds.
Ancel BA201 is a battery tester designed to determine the condition of automotive batteries, measuring parameters such as cold cranking current and internal resistance. It has real-time voltage display, supports multiple battery standards, and can print test results when connected to a computer.
Uni-T UT131D is a digital multimeter that measures DC voltage up to 250 V, AC voltage up to 250 V, and DC current up to 10 A. It has a backlit LCD display, manual measurement range selection, and non-contact voltage detection for increased safety.
Ugreen CM748 is a Bluetooth 5.4 adapter that allows your computer to wirelessly connect to multiple devices up to 20 meters away. It supports fast data transfer rates of up to 2 Gbps and is compatible with a variety of Bluetooth protocols.
UGREEN CM523 is a 2-in-1 Bluetooth 5.1 audio adapter that works as both a transmitter and receiver. It supports AUX mini jack 3.5 mm and USB-A connectors, allowing wireless audio streaming up to 10 meters with a built-in microphone for voice calling.
