Car Battery Testers - FNIRSI BTM-24 12 V / 24 V 2 000 A Battery Testers
Product reference:
14-5905156102323
FNIRSI BTM-24 - 12 V / 24 V automotive battery and charging system tester, measuring voltage, starting current up to 2,000 A, charge and condition level, internal resistance, starting characteristics and generator operation. The device supports CCA, EN, DIN, IEC, JIS and GB standards, is suitable for AGM, EFB, GEL and lead-acid batteries, has a 2.4-inch color TFT display and protected measurement leads.
Car Battery Testers - FNIRSI BTM-24 12 V / 24 V 2 000 A Battery Testers
Product reference:
14-5905156102323
FNIRSI BTM-24 - 12 V / 24 V automotive battery and charging system tester, measuring voltage, starting current up to 2,000 A, charge and condition level, internal resistance, starting characteristics and generator operation. The device supports CCA, EN, DIN, IEC, JIS and GB standards, is suitable for AGM, EFB, GEL and lead-acid batteries, has a 2.4-inch color TFT display and protected measurement leads.
You have 3 products in compare list, please remove someone and try again
- Add to favorites products
- Added to favorites products
- Removed to favorites product
Guarantee
24 month
Delivery from Europe in
15 - 16
business days
FNIRSI BTM-24 12 V/24 V 2,000 A battery tester
FNIRSI BTM-24 - automotive 12 V/24 V battery and charging system tester for measuring voltage, up to 2,000 A cranking current (CCA), SOC, SOH, internal resistance, starting characteristics and generator performance. It supports CCA, EN, DIN, IEC, JIS and GB standards, AGM, EFB, GEL and lead-acid batteries. Equipped with a 2.4-inch color TFT display and protective measurement leads.
- Tests 12 V and 24 V batteries, measures starting current up to 2,000 A.
- Quickly assesses SOH, SOC, internal resistance, cranking and charging system without straining the battery.
- Supports CCA, EN, DIN, IEC, JIS and GB standards, as well as AGM, EFB, GEL and flooded lead-acid batteries.
- Clear 2.4-inch color TFT display, real-time voltage curve graphs, protection against polarity reversal, overvoltage and short circuit.
Product information | |
|---|---|
| Product type | Car battery and charging system tester |
| Brand | FNIRSI |
| Model | BTM-24 |
| Suitable vehicles | Cars, motorcycles, ATVs, boats, delivery vehicles, trucks, fleet vehicles and golf carts |
Technical specifications | |
| Voltage measurement range | 6-30V |
| Testing modes | In and out of the vehicle |
| Measurement method | Non-destructive testing without loading the battery |
| Battery test result | GOOD, CHARGE or BAD status and technical readings |
| Start test limit | A cranking voltage greater than 9.6 V indicates normal cranking. |
| Display modes | Day and night |
| Management | Directional buttons and OK button |
| Data submission | Numerical readings and real-time voltage curve graphs |
| Measurement cable length | About 61 cm |
| Housing | Impact-resistant plastic |
| Dimensions | 80.5 × 155.8 × 28.2mm |
| Weight | About 479g |
| Menu languages | English and Chinese |
Construction and included accessories | |
| Design features | Integrated tear-resistant cable, insulated crocodile clips, foldable stand and hanging hole |
| Security features | Protection against polarity reversal, overvoltage and short circuit |
| Attached |
|
Safety warning | |
| Safe use | Use only to test suitable automotive batteries and charging systems. Follow the instructions in the user manual, connect the terminals to the correct terminals and do not use the tester with damaged, leaking or visibly corroded batteries. Keep the device away from flames and sparks. Wear suitable eye and hand protection when working around batteries. |
| Height | 100mm |
| Length | 300mm |
| Weight | 600g |
| Width | 200mm |
Offensive and promotional comments are unpublished.
Testimonials not found!
Request for product delivery/order
x