FNIRSI FNB58 BT USB port tester measures voltage, current, power, ripple and charging curves, supports PD3.1, PPS, QC and other fast charging protocols. Equipped with a 2-inch LCD display, USB-A, USB-C and Micro USB connectors, cable diagnostic function, up to 9 hours of offline data recording and Bluetooth connectivity.
FNIRSI FNB58 BT USB port tester measures voltage, current, power, ripple and charging curves, supports PD3.1, PPS, QC and other fast charging protocols. Equipped with a 2-inch LCD display, USB-A, USB-C and Micro USB connectors, cable diagnostic function, up to 9 hours of offline data recording and Bluetooth connectivity.
Guarantee
24 month
Delivery from Europe in
15 - 16
business days
FNIRSI FNB58 BT USB port tester measures voltage, current, power, ripple and charging curves. It supports PD3.1, PPS, QC and other fast charging protocols. Equipped with a 2-inch LCD display, USB-A, USB-C and Micro USB connectors, cable diagnostics, up to 9 hours of offline recording and Bluetooth connectivity.
Product information | |
|---|---|
| Product type | USB port and fast charging tester |
| Brand | FNIRSI |
| Model | FNB58 BT |
| 42 × 13 × 82 mm | |
| Screen | 2 inch LCD |
Connections and construction | |
| USB-A | 5-pin high-current input and output |
| USB-C | Input and output; 24 copper contacts |
| Micro USB | Input |
| Additional connection | Computer connection |
| Management | Function buttons, back button and separate PD switch |
Measurements and diagnostics | |
| Measurement resolution | Up to 0.0001 |
| Power ripple analysis | Charger output quality assessment |
| Waveform monitoring | Voltage, current and D+/D− curves |
| Cable diagnostics | PD E-Marker data, DASH cable parameters and cable impedance |
| PD E-Marker Detection | Supports cables rated for up to 240W |
| Cable resistance check | Two-phase measurement under constant current load |
| Battery capacity calculation | Integrated calculation based on recorded charging and discharging data |
Recording and communication | |
| Offline recording | Up to 9 hours |
| Data warehouse | Up to 10 sets of charging and discharging data |
| Wireless connection | Bluetooth |
| App and PC support | Monitoring on the mobile app and data synchronization with the computer without installing drivers |
| App alerts | Overvoltage and overcurrent warnings; alerts not supported on iOS |
Safety warning | |
| Important | Use the tester only to test compatible USB power supplies, chargers, cables, and devices. Stay within the specified voltage, current, and protocol limits. Do not use damaged cables or connectors. If the tester becomes hot, emits an unusual odor, or displays unusual readings, unplug it immediately. |
| Height | 100mm |
| Length | 150mm |
| Weight | 80 g |
| Width | 60mm |