UBIQUITI UniFi Access Door Hub

Prekės kodas: 18-UA-Hub-Door

UBIQUITI UniFi Access Door Hub

Prekės kodas: 18-UA-Hub-Door

UBIQUITI UniFi Access Door Hub

Jūsų palyginimo sąraše yra 3 prekės, prašome vieną pašalinti ir bandyti dar kartą.

Įtraukti į patikusias prekes
Pridėta į patikusias prekes
Pašalinta iš patikusų prekių

Įtraukti į palyginimą

21288 €

Prekė sandelyje

Garantija
12 mėn.

Pristatymas iš Lietuvos
per 2 - 3*
d. d.

Klausk apie prekę

A single-door mechanism that provides complete entry and exit control via connected Access Readers.

- (2) Lock terminals (12V and Dry)-(2) AUX terminals for an external siren and automatic door opener-(4) Additional inputs (sensors and buttons)-Connect and power using PoE++-Connect to two UniFi Access readers and two UniFi Protect camera or UniFi Protect Chime

Mechanical

Dimensions

174.9 x 126 x 32.9 mm (6.9 x 5 x 1.3')

Weight

363 g (12.8 oz)

Enclosure material

Polycarbonate

Mounting material

Polycarbonate

Hardware

Networking interface

(5) 10/100/1000 Base-T

Power method

PoE++

UL 294 Power-limited Class 2 PSU

UL 60950-1/62368-1 LPS/PS2 PSU

Max. power consumption

Without PoE output: 30W

With PoE output: 50W

PoE input

50V DC, 1A

PoE output

PoE passthrough, (4) PoE, 50V DC, total 20W

LEDs

White/blue(Learn more)

Button

(1) Factory-reset

Digital input

Request to exit/request to enter/remote release/door position sensor

Dry output relay

Lock: 30V DC, 1A

Aux: 30V DC, 1A

Powered output relay

Lock: 12V DC, 1A

Aux: 12V DC, 0.33A

12V DC, 0.33A

Recommend max. cable length

	18 AWG UACC-Cable-DoorLockRelay length	20 AWG length	22 AWG length	24 AWG length
UA-Lock-Electric (400mA)	100 m (328 ft)	66 m (217 ft)	42 m (138 ft)	25 m (82 ft)
UA-Lock-Magnetic-270kg (800mA)	46 m (151 ft)	30 m (98 ft)	20 m (66 ft)	12 m (29 ft)
UA-Lock-Magnetic-540kg (500mA)	80 m (262 ft)	51 m (167 ft)	32 m (105 ft)	20 m (66 ft)
Other locks (1A)	36 m (118 ft)	24 m (79 ft)	15 m (49 ft)	9 m (30 ft)

PoE cabling requirements

Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.

The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm²) for patch cords; 24 AWG (0.21 mm²) for horizontal or riser cable.

Operating environment

Indoor use only

Ambient operating temperature

0 to 40° C (32 to 104° F)

Ambient operating humidity

5 to 95% noncondensing

UL 294 level

Destructive attack: Level I

Line security: Level I

Endurance: Level I

Standby power: Level I

UL 294 statement

Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294.

The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.

CAN/ULC-60839-11-1 Grade

Grade assignment: 1

Certifications

CE, FCC, IC, UL 294, CAN/ULC-60839-11-1

Document number, and issue date and/or revision level

UA-Hub-Door002, V01

Įžeidžiantys bei reklaminio pobūdžio komentarai yra nepublikuojami.

Atsiliepimų nėra !

Atsiliepimas

Atsiliepimas pateiktas!

Užpildykite privalomus laukus*

Sutinku su privatumo politikos Taisyklėmis