Interface for connecting the opel 2-teile r4.0 intellilink camera

The adapter equips the car with a reversing camera and displays the image on the original car radio (which must be prepared for this). Some adapters are plug and play solutions, others require splicing cables or other modifications. Please read the assembly instructions in advance or contact us if you have any questions. In addition to the adapter, you need a reversing camera. We also encourage you to check out our full offer in the reversing camera tab. Video interface for the reversing camera, front camera and 2 additional video inputs. Suitable for Opel and Chevrolet Camaro vehicles with radio R4.0 IntelliLink 7-inch monitor with single radio housing. Product features: Video input for rear view camera Video input for front camera 2 video inputs for retrofit devices Automatic switching to rear view camera input when reverse gear is engaged Automatic front camera switching after reverse gear for 10 secondsLinks can be activated for reversing vehicles (not available for all vehicles)Image activation while driving (ONLY for entered video)Video inputs compatible with PAL and NTSCMake and model:Chevrolet Camaro 2016 ->Navigation MyLink - 7 inch monitor with separate radio boxOpel Astra K (Sports Tourer and 5-door) 2016 - 2019Opel Isignia B 2017 - 06/2018Opel Karl 03/2018 ->Navigation: R4.0 IntelliLink - 7-inch monitor with separate radio boxLimitations:Video only - Interface ONLY transmits video signals to the Infotainment system. You can use the factory AUX audio input or an FM modulator to transmit audio signals. If 2 AV sources are connected, additional electronics are required for audio switching.Factory Rear View Camera - Automatic switching to RFK only as long as reverse gear is engaged. Additional electronics are required to delay downshifts.Front camera - Switching to the front camera occurs automatically when reverse gear is disengaged for 10 seconds. Using the button, it is also possible to manually switch to the front camera. Parking lines -  Displaying distance lines does not work in all vehicles. Image input: Mini USBPower and CAN bus: Plug & Play (depending on the vehicle)Video inputs (2x): Cinch socketsReversing camera input: RCA socketFront camera input: RCA socketTechnical specificationsoperating voltage    12VDC (7~25V)quiescent current    15mPower consumption    160mA at 12V video input    0.7~1V Video input formats    PAL/NTSCT Operating temperature    -40°C to +85°CVideo box dimensions    117 x 25 x 105 mm (W x H x D) Legal notice Drivers must not be distracted directly or indirectly by moving images while driving. In most countries/states this is prohibited by law. In addition to operation when stationary, this product is intended only for displaying menus in a standing position (e.g. MP3 menus from DVD players) or images from the reversing camera while driving. Retrofit your car by purchasing a Citroen, Peugeot, Opel Camera Connection Interface. Toyota ProAce. NAC or RCC system. 7" or 8" screen. Taking care of your car's equipment is extremely important. This way, when we have an older car, we can be sure that it is up to date with the models currently released. Interface for connecting a Citroen, Peugeot, Opel camera. Toyota ProAce. NAC or RCC system. A 7" or 8" screen is a great option for people who do not have factory-installed reversing sensors.