Access point Teltonika DAP142
Product reference: 26-TELDAP142
  • Type: Access Point
  • Model: Teltonika DAP142
  • LAN ports: 2x 100 Mbps
  • Memory: 128MB DDR2
  • Flash memory: 16MB NOR
  • Power supply: 3-pin, 9-30VDC
  • Antenna connector: 1x RP-SMA
  • Serial connection: 1x DB9
  • Number of Wi-Fi users: up to 50
  • Frequency: 50MHz
  • Operating temperature: -40...75°C
Access point Teltonika DAP142

Access point Teltonika DAP142

Product reference: 26-TELDAP142
  • Type: Access Point
  • Model: Teltonika DAP142
  • LAN ports: 2x 100 Mbps
  • Memory: 128MB DDR2
  • Flash memory: 16MB NOR
  • Power supply: 3-pin, 9-30VDC
  • Antenna connector: 1x RP-SMA
  • Serial connection: 1x DB9
  • Number of Wi-Fi users: up to 50
  • Frequency: 50MHz
  • Operating temperature: -40...75°C
You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
66,55 €
Product in warehouse

Guarantee
24 month

Delivery from Lithuania in
2 - 4
business days

Your message has been successfully sent!
Fill in the required fields*
  • Wireless connection
  • Wireless mode IEEE 802.11b/g/n (Wi-Fi 4), Access Point (AP), Client (STA), Mesh (802.11s), Multi AP
  • Wifi protection WPA-PSK, WPA2-PSK, WPA3-SAE, WPA-EAP, OWE, WPA2-EAP, WPA3-EAP
  • SSID/ESSID ESSID stealth mode
  • Wi-Fi users Up to 50 simultaneous connections
  • Wireless features Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
  • Wireless communication MAC filter Allowlist, blocklist
  • Wireless QR code generator Once scanned, a user will automatically enter your network without needing to input login information
  • TravelMate Forward Wi-Fi hotspot landing page to a subsequent connected device
  • Ethernet
  • LAN 2 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
  • Network
  • Route Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
  • Protocols TCP, UDP, IPv4, IPv6, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SNMP, MQTT, Wake On Lan (WOL)
  • VoIP gateway support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
  • Communication monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
  • Firewall Port forward, traffic rules, custom rules
  • Firewall status page View all your Firewall statistics, rules, and rule counters
  • Port management View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
  • Network topology Visual representation of your network, showing which devices are connected to which other devices
  • DHCP Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
  • QoS/Smart Queue Management (SQM) Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
  • DDNS Supported > 25 service providers, others can be configured manually
  • DNS over HTTPS DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
  • Network backups Wi-Fi WAN, VRRP, Wired options, each of which can be used as an automatic failover
  • Load balancing Balance Internet traffic over multiple WAN connections
  • Hotspot 2.0 Hotspot 2.0 is a Wi-Fi standard that enables seamless, secure, and automatic connection to trusted wireless networks
  • SSHFS Possibility to mount remote file system via SSH protocol
  • VRF support Initial virtual routing and forwarding (VRF) support
  • Traffic management Real-time monitoring, wireless signal charts, traffic usage history
  • Security
  • Authentication Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal External RADIUS users authentication, IP login attempts block, time-based login blocking, built-in random password generator
  • Firewall Preconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
  • Burglary prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
  • VLANs Port and tag-based VLAN separation
  • WEB filter Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
  • Access control Flexible access control of SSH, Web interface, CLI and Telnet
  • Generating SSL certificates Let's Encrypt and SCEP certificate generation methods
  • VPN
  • OpenVPN Multiple clients and a server can run simultaneously, 27 encryption methods
  • OpenVPN encryption DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
  • IPsec XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
  • GRE GRE tunnel, GRE tunnel over IPsec support
  • PPTP, L2TP Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
  • Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program's code
  • DMVPN Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support
  • SSTP SSTP client instance support
  • ZeroTier ZeroTier VPN client support
  • WireGuard WireGuard VPN client and server support
  • Tinc Tinc offers encryption, authentication and compression in its tunnels. Client and server support.
  • Tailscale Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol
  • OPC UA
  • Supported modes Client, Server
  • Supported connection types TCP
  • MODBUS
  • Supported modes Server, Client
  • Supported connection types TCP, RTU(RS232)
  • Custom registers MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
  • Supported data formats 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
  • DATA TO SERVER
  • Protocol HTTP(S), MQTT, Azure MQTT
  • Date to server Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature
  • MQTT Gateway
  • Modbus MQTT Gateway Allows sending commands and receiving data from MODBUS Server through MQTT broker
  • DNP3
  • Supported modes Station, Outstation
  • Supported connection TCP, RTU(RS232)
  • DLMS/COSEM
  • DLMS Support DLMS - standard protocol for utility meter data exchange
  • Supported modes Client
  • Supported connection types TCP, RTU(RS232)
  • COSEM Allows to scan meter COSEM objects for automatic detection and configuration
  • API
  • Teltonika Networks Web API (beta) support Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com
  • Monitoring Management
  • WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status
  • PHOTO Firmware update from server, automatic notification
  • SSH SSH (v1, v2)
  • Email Receive email message status alerts of various services
  • TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
  • MQTT MQTT Broker, MQTT publisher
  • SNMP SNMP (v1, v2, v3), SNMP Trap, Brute force protection
  • JSON-RPC Management API over HTTP/HTTPS
  • MODBUS MODBUS TCP status/control
  • RMS Teltonika Remote Management System (RMS)
  • IoT platforms
  • ThingWorx Utility to interact with Thingworx cloud platform
  • Cumulocity - Cloud of Things Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP. Has reboot and firmware upgrade actions
  • Azure IoT Hub Can be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs
  • AWS IoT Core Utility to interact with the AWS cloud platform. Jobs Support: Call the device's API using AWS Jobs functionality
  • System Characteristics
  • Processor Mediatek, 580 MHz, MIPS 24KEc
  • RAM 128 MB, DDR2
  • FLASH storage 16 MB serial NOR flash
  • Settings
  • WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup
  • PHOTO Update FW
  • RMS Update FW/configuration for multiple devices at once
  • Remembering settings Update FW without losing current configuration
  • Factory reset A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration
  • FIRMWARE CUSTOMIZATION
  • Operating system RutOS (OpenWrt based Linux OS)
  • Languages Busybox shell (ash), Lua 5.1, C, C++
  • Developer tools SDK package with build environment provided
  • GPL customization You can create your own custom, branded firmware and web page application by changing colors, logos, and other elements in our firmware to fit your or your clients' needs
  • Package Manager The Package Manager is a service used to install additional software on the device
  • Series
  • RS232 Terminal block connector: TX, RX, RTS, CTS
  • Serial functions Console, Serial over IP, Modem, MODBUS gateway, NTRIP Client
  • Energy
  • Connection 3-pos pluggable terminal block
  • Input voltage range 9-30 VDC, reverse polarity protection, surge protection > 31 VDC 10us max
  • PoE (passive) Passive PoE over spare pairs. Possibility to power up through LAN2 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC
  • Energy consumption Idle: < 1 W / Max: < 2 W
  • Physical interfaces
  • Ethernet 2 x RJ45 ports, 10/100 Mbps
  • Status indicators LED 2 x LAN type LED, 1 x Power LED
  • Energy 1 x 3-pin power connector
  • Antennas 1 x RP-SMA for Wi-Fi
  • RS232 1 x DB9 socket
  • Reloading Reboot/User default reset/Factory reset button
  • Other 1 x Grounding screw
  • Physical specifications
  • Housing material Aluminum housing
  • Dimensions (W x H x D) 113.10 x 25 x 68.6 mm
  • Weight 149.2 grams
  • Installation Integrated DIN rail bracket; wall mount and flat surface (additional kit needed)
  • Work environment
  • Operating temperature -40°C to 75°C
  • Humidity 10% to 90% non-condensing
  • IP rating IP30

ManufacturerTeltonika Networks
Manufacturer codeTELDAP142
Weight0.149 kg
Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial