Shaft antenna GPS GNSS GSM UMTS LTE Fakra(f)

Shaft antenna GPS/GNSS GSM/UMTS/LTE Fakra(f) ATTB 4576.02 ATTB 4576.02 is a professional shaft antenna designed for signal reception GPS/GNSS and communication GSM, UMTS and LTE The product comes from a German manufacturer Antennentechnik Bad Blankenburg, which has been developing high-quality antenna solutions "Made in Germany" since 1919. The antenna is designed for mounting on a vehicle's windshield. This makes it suitable for applications where mounting a roof antenna is difficult or inadvisable. It is a practical solution for passenger cars, vans, campers, caravans, motorhomes, and commercial vehicles. The windshield antenna for GPS/GNSS and LTE. The ATTB 4576.02 model supports GPS/GNSS satellite location and transmission in GSM, UMTS, and LTE networks. The GPS/GNSS antenna operates with 3.3-5.5 V phantom power, while the GSM/LTE/UMTS path supports power up to 4 W. The product includes two 400 cm RG174 cables. The GPS/GNSS path is terminated with a connector. Fakra C(f) in blue color, and the GSM/LTE/UMTS track with a connector Fakra D(f) in burgundy color. The most important advantages of the ATTB 4576.02 antenna

• original ATTB shaft antenna Made in Germany,
• GPS/GNSS, GSM, UMTS and LTE support,
• installation on the vehicle windshield,
• GPS/GNSS connector Fakra C(f),
• GSM/LTE/UMTS Fakra D(f) connector,
• RG174 cables, 400 cm long,
• active GPS/GNSS antenna with phantom power,
• GPS/GNSS gain 27 dB +/- 2 dB,
• GPS/GNSS gain 26 dBi,
• GSM/LTE/UMTS gain up to 2 dBi,
• impedance 50 Ohm,
• maximum GSM/LTE/UMTS track power: 4 W,
• optimized reception properties.

Made in Germany - Quality from Antennentechnik Bad Blankenburg. Antennentechnik Bad Blankenburg is a German manufacturer of automotive antennas and antenna accessories. The company develops solutions for numerous communication standards, such as GPS, GNSS, LTE, 5G, GSM, UMTS, WLAN, Bluetooth, DAB+, and TETRA. The production process of ATTB antennas is certified according to automotive industry standards. Product quality is monitored at our own test stations from the design stage, through series production, to final inspection. This makes the ATTB 4576.02 antenna suitable for demanding automotive installations. Applications: The ATTB 4576.02 windshield antenna is designed for receiving satellite and cellular signals in vehicles. It is suitable for GPS systems, location modules, LTE routers, vehicle modems, and telematics systems. The product can be used for applications such as:

• GPS/GNSS navigation,
• vehicle location systems,
• fleet and telematics modules,
• LTE car routers,
• GSM/UMTS/LTE modems,
• passenger cars and vans,
• campers, caravans and motorhomes,
• commercial and special vehicles.

Important installation information: The antenna should be mounted vertically on the windshield. Maintain a minimum 5 mm gap between the antenna and bodywork components. The mounting location should be clean, dry, degreased, and free of coatings, metallic particles, and windshield heating wires. Before attaching the antenna, clean the surface with appropriate cleaning agents to remove dust and grease. Proper windshield preparation significantly affects the durability of the installation and the quality of reception. If reception problems occur, check the antenna cables, adapters, and the quality of the connections. It is also worth verifying whether additional LED lighting, USB chargers, voltage converters, power supplies, or digital power amplifiers are causing interference. Technical data

• Producer: Antennentechnik Bad Blankenburg / ATTB
• Model: 4576.02
• Product type: GPS/GNSS GSM/UMTS/LTE shaft antenna
• Installation: on the glass
• Wires: RG174 / L = 400 cm
• GPS/GNSS connection: Fakra C(f) blue / RG174 / L = 400 cm
• GSM/LTE/UMTS connection: Fakra D(f) burgundy / RG174 / L = 400 cm
• GPS/GNSS range: 1575-1610 MHz
• GSM/LTE/UMTS range: 703-960MHz / 1711-2170MHz / 2500-2600MHz
• GPS/GNSS gain: 27 dB +/- 2 dB
• GPS/GNSS gain: 26 dBi
• GSM/LTE/UMTS 703-960MHz Gain: 1 dBi +/- 0.5 dBi
• Gain GSM/LTE/UMTS 1711-2170 MHz / 2500-2600 MHz: 2 dBi +/- 0.5 dBi
• GPS/GNSS power supply: 3.3-5.5V phantom power
• GPS/GNSS power consumption: 15-40 mA max
• GSM/LTE/UMTS power: 4 in
• GPS/GNSS impedance: 50 Ohm
• GSM/LTE/UMTS impedance: 50 Ohm
• VSWR GPS/GNSS: <2.0:1
• VSWR GSM/LTE/UMTS: <3.0:1
• Country