TELTONIKA Wi-Fi 6 Access Point

The TAP400 is a high-performance Wi-Fi 6 access point designed for SMBs that need fast, efficient wireless coverage and simple centralized management. Experience ultra-fast throughput with the dedicated 2.5 GbE uplink and multi-user efficiency of Wi-Fi 6. The device ensures network continuity and seamless expansion with Fast Roaming and Mesh. All network configuration, monitoring, and troubleshooting can be handled remotely via Teltonika RMS, allowing you to seamlessly reach and control other devices on the network. Upgrade your business to high-performance connectivity that covers every corner.

WI-FI 6

Robust wireless network for optimal multi-user efficiency

CENTRALISED CONTROL

Configure, monitor, and troubleshoot remotely via RMS

Wi-Fi MANAGEMENT

Manage multiple devices and visualize your setup with the network map

ALWAYS-ON COVERAGE

Stay online and extend coverage with Fast Roaming and Mesh

Wireless

Wireless mode: 802.11b/g/n/ac/ax (Wi-Fi 6) with data transmission rates up to 2402 Mbps on 5GHz and 576 Mbps on 2.4GHz (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)

Wi-Fi security: WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)

SSID/ESSID: SSID stealth mode and access control based on MAC address

Wi-Fi users: Up to 512 simultaneous connections

Wireless Connectivity Features: Wireless mesh (802.11s), fast roaming (802.11r), BSS transition management (802.11v), radio resource measurement (802.11k)

Wireless MAC filter: Allowlist, blocklist

Wireless QR code generator: Once scanned, a user will automatically enter your network without needing to input login information

TravelMate: Forward Wi-Fi hotspot landing page to a subsequent connected device

Ethernet

Ethernet: 1 x RJ45 port 100/1000/2500 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Network

Network protocols: TCP, UDP, ICMP, GRE, ESP, RIP, OSPF, BGP, IPsec, IPv4, IPv6, ARP, IPsec, PPP, HTTP, TTPS

Connection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

DNS over HTTPS: DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS

Hotspot 2.0: Hotspot 2.0 is a Wi-Fi standard that enables seamless, secure, and automatic connection to trusted wireless networks

Traffic Management: Real-time monitoring, wireless signal charts, traffic usage history

Security

Authentication: SSH key based, HTTPS, CLI, IP & Login attempts block, time-based login blocking, built-in random password generator

VLAN: Tag-based VLAN separation

Access control: Flexible access control of SSH, Web interface, CLI and Telnet

Certificate Manager: Certificate creation tool allows to create CA, server, client, let's encrypt, SCEP certificates

802.1x: Port-based network access control client

Data to Server

Protocol: HTTP(S), MQTT, Azure MQTT

Data to server: Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature

API

Teltonika Networks Web API (beta) support: Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com

Monitoring & Management

WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log

FOTA: Firmware update from server, automatic notification

SSH: SSH (v1, v2)

Email: Receive email message status alerts of various services

JSON-RPC: Management API over HTTP/HTTPS

Wi-Fi Scanner: Wi-Fi Scanner scans and collects information about wireless devices in surrounding area

RMS: Teltonika Remote Management System (RMS)

System Characteristics

CPU: Mediatek, Dual-Core, 1.3 Ghz

RAM: 512 MB, DDR3

FLASH storage: 16MB SPI NOR Flash, 512MB SPI NAND Flash

Firmware/Configuration

WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup

FOTA: Update FW

RMS: Update FW/configuration for multiple devices at once

Keep settings: Update FW without losing current configuration

Factory settings reset: A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration

Firmware Customisation

Operating system: RutOS (OpenWrt based Linux OS)

Supported languages: Busybox shell, Lua, C, C++

Development tools: SDK package with build environment provided

GPL customization: You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients' needs

Power

Connector: RJ45 Socket

Input voltage range: 44.0 - 57.0 V, surge protection > 64.4 VDC 10us max

PoE standards: 802.3af PoE Class 3

Power consumption: Idle: < 7 W / Max: < 11 W

Physical Interfaces

Ethernet: 1 x RJ45 port, 100/1000/2500 Mbps

Status LEDs: 1 x Power LED (can be turned off from web-UI)

Antennas: 3 x Internal for 2.4 GHz Wi-Fi and 5 GHz Wi-Fi antennas

Antennas specifications: 3x 2400 - 2500 MHz, peak gain < 4.33 dBi & 5150 - 5850 MHz, peak gain < 4.9 dBi, omnidirectional

Reset: Reboot/User default reset/Factory reset button

Physical Specification

Casing material: UV stabilized plastic, aluminum

Dimensions (W x H x D): Ø 158 mm x 31.4 mm

Weight: 285 g

Mounting options: AP mounting bracket (for ceiling mount)

Operating Environment

Operating temperature: 0 °C to 50 °C

Operating humidity: 10% to 90% non-condensing

Ingress Protection Rating: IP30

Regulatory & Type Approvals

Regulatory: CE, UKCA, CB, EAC, UCRF, RCM, FCC, IC, WEEE

EMC Emissions & Immunity

Standards:

EN 55032:2015+A11:2020

EN 55035:2017+A11:2020

EN 61000-3-3:2013+A1:2019+A2:2021

EN IEC 61000-3-2:2019+A1:2021

EN 301 489-1 V2.2.3

EN 301 489-17 V3.2.4

ESD: EN 61000-4-2:2009

Radiated Immunity: EN IEC 61000-4-3:2020

EFT: EN 61000-4-4:2012

Surge Immunity (AC Mains Power Port): EN 61000-4-5:2014 + A1:2017

CS: EN 61000-4-6:2014

DIP: EN IEC 61000-4-11:2020

RF

Standards: EN 300 328 V2.2.2; EN 300 893 V2.1.1; EN 300 440 V2.2.1

Safety

Standards:

IEC 62368-1:2018

EN IEC 62368-1:2020+A11:2020

EN IEC 62311:2020

Package contains:

- Access Point TAP400

- QSG (Quick Start Guide)

- Wi-Fi Information sticker

- Packaging box