wire stripper pliers crimper amio-03132

Device designed for stripping insulation from wires. Press operating range: 0.2 - 6.0 mm² (10 - 24 AWG) multifunctional, reinforced device, has a rubberized handle and hardened blades mechanism: frontal, automatic in the process of stripping insulation it automatically adjusts to the cross-section of the processed wire additionally has a cutter and a press for terminals the stripper has an adjustable length of the section to be stripped length: 205 mm weight: 0.30 kg Crimping of connector terminals: insulated: 0.5 - 6 mm² x a0 (22-10 AWG), non-insulated: 4 - 6 mm² (12-10 AWG), 1.5 - 2.5 mm² (16-14 AWG), 05 - 1mm² (22-18 AWG). HIGH QUALITY OF MANAGEMENT AUTOMATIC STRIPPER INSULATION STRIPPER -xa0This practical tool will allowxa0you to quickly and precisely remove insulation from single-core or multi-core cables. To strip the insulation, insert the cable into the jaws so that it adheres evenly to the tool - then squeeze the handleWIRE CUTTER -xa0Another function of the stripper is to cut cables.xa0The 11 mm blade is located between the tool handles.xa0To cut a cable of similar or smaller width, simply place it between the blades and squeeze firmly.CONNECTOR TERMINAL PRESS -xa0The device can be used to crimp insulated and non-insulated connector terminals on cable cores with a cross-section of 1.5 mm2 to 6 mm2. Just insert the wire with the stripped end and insert it into the connector terminal, then place it in the place intended for crimpingPRESSURE FORCE ADJUSTMENT + LIMITER -xa0the device has a knob located under the jaws. With its help, you can adjust the pressure on the insulation, so you do not have to worry about damaging the wire during work.