UBIQUITI G2 Starter Kit
Product reference: 18-UA-G2-SK

UBIQUITI G2 Starter Kit

UBIQUITI G2 Starter Kit

UBIQUITI G2 Starter Kit

Product reference: 18-UA-G2-SK

UBIQUITI G2 Starter Kit

You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
304,97 €
Last product in warehouse

Guarantee
12 month

Delivery from Lithuania in
2 - 4
business days

Your message has been successfully sent!
Fill in the required fields*

UA-G2-SK is a comprehensive 2nd-generation single-door access control system. UniFi Access G2 Starter Kit contains everything you need to set up the access control system for your business. The UniFi Access G2 Starter Kit is installed with minimal effort and offers the convenience of the UniFi Access Application, which allows you to easily manage users, visitors, schedules, and access policies. The UniFi Access G2 Starter kit is powered by PoE technology, PoE Switch is not included.


G2 Starter Kit Contents:



  • 1x UniFi Access Hub

  • 1x UniFi Access Reader G2

  • 10x UniFi Access Cards


UA-Hub-Door Mechanical
Dimensions 174.9 x 126 x 32.9 mm (6.9 x 5 x 1.3')
Weight 363g (12.8oz)
Enclosure material Polycarbonate
Mounting material Polycarbonate
Hardware
Network interface (5) 10/100/1000 Base-T
Power method PoE++ UL 294 Power-limited Class 2 PSU UL 60950/62368 LPS/PS2 PSU
Max. power consumption Without PoE output: 30W With PoE output: 50W
PoE input 50V DC, 1A
PoE output PoE passthrough, (4) PoE, 50V DC, total 20W
Button (1) Factory reset
LEDs System: white/blue Output relays: white
Digital input Request to exit/request to enter/remote release/door position sensor
Dry output relay Lock: 30V DC, 1A Aux: 30V DC, 1A
Powered output relay Lock: 12V DC, 1A Aux: 12V DC, 0.33A 12V DC, 0.33A
Operating environment Indoor use only
Operating temperature 0 to 40°C (32 to 104°F)
Operating humidity 5 to 95% non-condensing
UL 294 level Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I
UL 294 statement Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
CAN/ULC-60839-11-1 Grade Grade assignment: 1
Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level UA-Hub-Door002, V01
Wiring Information
Typical installation (Shielded)
DC power input Belden 8750 18 AWG 2 conductor (30.5 m/100 ft)
Door position switch Belden 8750 18 AWG 2 conductor (152.5 m/500 ft)
Request to exit Belden 8750 18 AWG 2 (152.5 m/500 ft)

Wiring gauge requirements (AWG)
Total length to device Output load current at 12V DC
100mA 250mA 500mA 1A
6.1 m (20 ft) 22 22 22 18
15.2 m (50 ft) 22 22 22 18
30.5 m (100 ft) 22 22 18 18

PoE cabling requirements The minimum conductor gauge allowed to connect between the PSE or power injector and the PD shall be 24 AWG (0.21 mm2) for horizontal or riser cable.
LEDs
PoE in Steady blue: Adopted/device is ready Steady white: Pending adoption Blinking white/blue: Upgrading firmware
PoE out Off: Not connected or no data link Steady blue: Connected and data link on
UA-G2 Mechanical
Dimensions 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4')
Weight 82g (2.9oz)
Enclosure material Polycarbonate, glass
Mounting In-wall, gang box
Weatherproofing IP55
Hardware
Network interface (1) 10/100 MbE RJ45 port
Connectivity Bluetooth 4.1
Power method PoE
Supported voltage range 48V DC
Max. power consumption 5W
ESD/EMP protection Air: ±15kV, contact: ±8kV
Sensors Proximity sensor
Speaker (1) 8 ohm, 0.7W
LEDs R/G/B/W
Button (1) Factory reset
NFC frequency 13.56MHz
NFC reading range < 30mm
NFC standards ISO 14443A, 14443B, 15693
NFC technology NFC Tag 1,2,3,4,5 MIFARE Classic MIFAREPlus MIFARE Ultralight MIFARE DESFire
Operating temperature -30 to 45° C (-22 to 113° F)
Operating humidity 5 to 90% non-condensing
Certifications CE, FCC, IC
UA-Card Mechanical
Dimensions 85.6 x 53.98 x 0.84 mm (3.37 x 2.13 x 0.03')
Weight 5 g (0.18 oz)
Format ISO 7810 ID-1
NFC frequency 13.56MHz
NFC technology ISO/IEC 14443 Type A MIFARE DESFire UniFi Access Proprietary Security Protocol
Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial