UBIQUITI 24 Ports Gigabit PoE Switch Pro Max 24 PoE (USW-Pro-Max-24-PoE)
Product reference:
18-USW-Pro-Max-24-PoE
UBIQUITI 24 Ports Gigabit PoE Switch Pro Max 24 PoE (USW-Pro-Max-24-PoE)
UBIQUITI 24 Ports Gigabit PoE Switch Pro Max 24 PoE (USW-Pro-Max-24-PoE)
Product reference:
18-USW-Pro-Max-24-PoE
UBIQUITI 24 Ports Gigabit PoE Switch Pro Max 24 PoE (USW-Pro-Max-24-PoE)
You have 3 products in compare list, please remove someone and try again
- Add to favorites products
- Added to favorites products
- Removed to favorites product
Guarantee
12 month
Delivery from Lithuania in
2 - 4
business days
The Ubiquiti Professional Max 24 PoE is a high-performance Layer 3 Ethernet switch designed to meet the demands of modern network environments. The switch is equipped with 24 ports, including eight 2.5 GbE PoE++ ports, 16 GbE ports (8 PoE+ and 8 PoE++), and two 10G SFP+ ports, featuring the exceptional bandwidth and versatility. With its comprehensive features and robust capabilities, it can handle even the most demanding network traffic, ensuring seamless connectivity and optimal performance for all connected devices.
The switch powers up demanding devices like access points, IP cameras, and VoIP phones with up to 60W of PoE++ power per port. The illuminated Etherlighting ports help to easily identify port location, speed/link, and native VLAN/network. Uninterrupted operation during power outages is ensured with DC power backup support. You can easily manage and configure the switch from a single, unified interface using the Ubiquiti UniFi Network Controller.
- Etherlighting™ ports that illuminate to indicate port location, speed/link, and native VLAN/network*
- (8) 2.5GbE PoE++ ports
- (16) GbE ports including (8) PoE+ and (8) PoE++
- (2) 10G SFP+ ports
- DC power backup ready
- 400W total PoE availability
- Managed with UniFi Network 8.0.24 and later
| Mechanical | |
|---|---|
| Dimensions | 442 x 325 x 44 mm (17.4 x 12.8 x 1.7') |
| Weight | Without mounting brackets: 5.1 kg (11.3 lb) With mounting brackets: 5.2 kg (11.5 lb) |
| Enclosure material | SGCC steel |
| Hardware | |
| Management interface | Ethernet In-Band |
| Network interface | (16) GbE RJ45 ports (8) 1/2.5 GbE RJ45 ports (2) 10G SFP+ ports |
| PoE interface | (8) PoE/PoE+ (Pins 1, 2+; 3, 6-) (16) 60W PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 8-) |
| Total non-blocking throughput | 56 Gbps |
| Switching capacity | 112 Gbps |
| Power method | (1) Universal input, 100—240V AC, 50/60 Hz (1) USP-RPS DC input |
| Power supply | AC/DC, internal, 450W |
| Supported voltage range | 100—240V AC |
| Max. power consumption | 50W (Excluding PoE output) |
| Total available PoE | 400W |
| Max. PoE wattage per port by PSE | PoE: 15.4W PoE+: 30W PoE++: 60W |
| Voltage range PoE mode | PoE: 44—57V PoE+: 50—57V |
| LCD display | (1) 1.3' touchscreen |
| Button | Factory reset |
| Ambient operating temperature | -5 to 40°C (23 to 104°F) |
| Ambient operating humidity | 10 to 90% non-condensing |
| Certifications | CE, FCC, IC |
| Switching Features | |
| Layer 2 features | IGMP snooping STP / RSTP with priorities and port-level disable Port isolation Storm control Voice VLAN Port mirroring LACP port aggregation Multicast / broadcast rate limiting MAC address blocking Flow control 802.1X control Jumbo frames Proprietary loop protection DHCP snooping / guarding Egress rate limit LLDP-MED Port restricted by MAC Device isolation with ACLs |
| Layer 3 features | DHCP for locally-managed networks DHCP relay Inter-VLAN routing between networks on the same switch Static routing between local networks Network isolation with ACLs |
| Etherlighting™ | |
| Ethernet | Locating Speed/link Native VLAN/network |
| SFP+ | Locating Speed/link Native VLAN/network |
| LEDs | |
| System | Status |
| RPS | Status |
| Application Requirements | |
| UniFi Network | Version 8.0.24 and later |
Offensive and promotional comments are unpublished.
Testimonials not found!
Request for product delivery/order
x