Victron Multi HS19 Solar 15k three-phase inverter/charger for 650-1000V systems with 15kW continuous power and four MPPT trackers.
Victron Multi HS19 Solar 15k three-phase inverter/charger for 650-1000V systems with 15kW continuous power and four MPPT trackers.
Guarantee
24 month
Delivery from Europe in
5 - 8
business days
The Multi HS19 Solar 15k is an advanced three-phase inverter/charger designed by Victron Energy, designed for installation in a standard 19-inch rack. This device combines three-phase power, battery charging, and advanced Maximum Power Point Tracking (MPPT) from photovoltaic panels. This provides users with an efficient and flexible solution for their renewable energy systems.
The Multi HS19 Solar 15k is optimized for high-voltage systems in the 650-1000 V range. It offers 15 kW of continuous power and charging capacity of up to 33 kW at 800 V. Thanks to its high efficiency, reaching up to 98%, the device minimizes energy losses, which translates into savings and increased system efficiency.
Built-in four independent MPPT trackers enable up to 32 kW of solar panel power, maximizing solar energy utilization. With a maximum MPPT input voltage of 600 V and MPPT efficiency of up to 99%, the Multi HS19 ensures optimized energy production, even in variable lighting conditions.
The device is equipped with an intuitive built-in display that allows for real-time system monitoring and configuration. Additionally, Bluetooth, VE.Can, and Battery CAN-bus communication interfaces facilitate integration with other system components and enable remote data access.
The Multi HS19 Solar 15k is the ideal solution for professional photovoltaic installations that require reliable and efficient power systems. Its versatility makes it suitable for both residential installations and commercial renewable energy projects.
| Apparent/rated power | 15 kVA / 15 kW |
|---|---|
| Continuous output power (up to 40°C) | 15 kW |
| Peak power | 22 kW (5 sec) |
| Inverter peak AC current | 32 A (5 sec) |
| Continuous AC current per phase | 22 A RMS |
| AC voltage | 400 Vac ±10%, 3-phase |
| AC frequency (range) | 50/60 Hz (45-65 Hz) |
| Total Harmonic Distortion (THD) | <3% |
| Maximum efficiency | 98% |
| No-load power consumption (at 650 V) | 50 W |
| AC connections | L1, L2, L3, N, PE |
| Number of AC inputs/outputs | 1 input / 2 outputs |
| Max AC input and through current | 32 A |
| Maximum open circuit voltage (Voc) | 600V |
| Max. short circuit current / MPP per string | 13.5A / 13.5A |
| Number of independent trackers/strings | 4/4 |
| MPPT operating voltage range | 100-600V |
| Minimum solar voltage for start-up | 300V |
| Maximum power per string | 8 kW (32 kW total) |
| MPPT efficiency | 99% |
| Battery operating voltage range | 650-1000V |
| Maximum discharge current | 25 A |
| Maximum charging current | 41 A (up to 33 kW at 800 V) |
| Battery communication | CAN |
| Supported batteries | Batteries supporting the Victron HV Protocol |
| Parallel work | NO |
| Overvoltage category | PV II / AC III |
| Environmental conditions | Inside, air-conditioned |
| Security | PV Overvoltage / PV Overcurrent / DC Insulation Resistance / Differential Current Monitor / AC Overcurrent |
| Operating temperature | 0 to +60°C (full power up to 40°C) |
| Cooling | Forced by air |
| Maximum altitude above sea level | 2000 m |
| Humidity (non-condensing) | 95% |
| Degree of protection | IP20 |
| Programmable relay | Yes (3 A, up to 30 Vdc) |
| Remote on/off terminal | Yes |
| Data communication | 1× battery CAN port, 1× VE.Can, VE.Direct, Bluetooth |
| 19″ rack height / depth / weight | 4U / 70 cm / 26.5 kg |
| AC connectors | Spring push-in: rigid cable 0.2-10 mm², flexible cable 0.25-6 mm² |
| DC connectors | 5.7 mm Surlok |
| MC4 connectors | Staubli PV-ADBP4-S2-UR-2.5 (female) / PV-ADSP4-S2-UR-2.5 (male) |
| Electrical safety | EN-IEC 62109-1, EN-IEC 62109-2, pollution degree 2 |
| Emission/immunity | EN-IEC 61000-3-11, 61000-3-12; IEC 61000-6-1, 61000-6-2, 61000-6-4 |
| Product code | PMR803150300 |
| Catalog card | Download (EN) |
The device weighs 26.5 kg and is covered by a standard 5-year warranty Victron Energy, providing users with added peace of mind and quality assurance. Before installation, it's worth paying attention to the manufacturer's recommendations regarding installation conditions and compatibility with other system components. The Multi HS19 Solar 15k is an excellent choice for demanding users seeking reliable and efficient solar power solutions. The kit includes the necessary mounting accessories and user manuals, making installation and configuration easy.