EPEVER IPT500-12(E) voltage converter 12V / 500W

Converter EPEVER IPT500-12(E) 12V/500W This advanced sine wave inverter efficiently converts 12V DC to 220/230V AC. Designed for photovoltaic systems, it's also ideal for campers, caravans, and smaller photovoltaic installations. The device provides stable power, which, thanks to its pure sine wave signal, is safe for sensitive electrical devices.

High performance and stability

Products from the series IPT stand out from the competition thanks to their reliability and stable operation. Pure sine wave signal guarantees safety for connected devices by eliminating the risk of electromagnetic interference. The inverter is ideal for powering lighting, household appliances, and electronics in systems that require reliable and trouble-free power.

Advanced protection features

The converter is equipped with a range of advanced protective features that protect devices against overload, short circuit, and overheating. Furthermore, thanks to electrical isolation between input and output, the converter provides an additional layer of safety, minimizing the risk of failure.

Compatibility and versatility

Thanks to its compatibility with a wide range of devices, the converter IPT500-12 can be used in various installations, from campers to small photovoltaic systems. Remote control via port possible RS485 allows the user to monitor and control the device remotely, which increases the comfort of use.

Key features

• Pure sine wave output: Provides stable power without the risk of interference with connected devices.


• Advanced protection features: Protection against overload, short circuit, overheating, low and high input voltage.


• Remote monitoring: Possibility to control and monitor the converter via the port RS485.


• Versatility of use: The perfect solution for photovoltaic systems, campers and caravans.

Technical specifications

• Model: IPT500-12


• Continuous output power: 500W


• Peak power: 1000W (for 5 seconds)


• Current: 50A


• Output voltage: 220VAC (±3%); 230VAC (-7%~+3%)


• Output frequency: 50/60Hz (±0.2%)


• Output signal: Pure sine wave


• Signal distortion THD: ≤3% (with resistive load)


• Load power factor: 0.2 ~ 1


• Nominal input voltage: 12VDC


• Input voltage range: 10.8 ~ 16.0VDC


• Nominal output efficiency: > 89.5%


• Maximum output efficiency: > 91% (at 40% load)


• Idle current: 0.15A


• No-load current: 0.9A


• RS485 communication port: 5VDC/200mA


• Input terminal: M6


• Dimensions (L x W x H): 286 × 160 × 73 mm


• Mounting dimensions: 262 × 75 mm


• Mounting hole size: Φ5 mm


• Libra: 2.3 kg


• Operating temperature: -20 ~ +60


• Storage temperature: -35 ~ +70


• Relative humidity: ≤95% (non-condensing)


• Case: IP20


• Maximum working height: 5000 m (above 1000 m the rated power is reduced in accordance with IEC62040)

Converter EPEVER IPT500-12(E) 12V/500W It's a reliable solution for anyone needing stable and safe power for mobile systems or smaller photovoltaic installations. With advanced protection features and remote monitoring capabilities, this inverter ensures maximum convenience and safety.