Video interface for rear view camera, front camera land rover, jaguar 2016 - incontrol touch pro 10 inch

The video interface allows you to connect a reversing camera, an automatic front camera and two other video sources (e.g. USB player, DVB-T2 tuner, etc.) to the vehicle manufacturer's factory infotainment system. Product features Video interface for factory infotainment systems 1 CVBS reversing camera video input 1 CVBS front camera video input 2 CVBS video inputs for retrofit devices (e.g. USB player, DVB-T2 tuner, ...) Automatic switching to the reversing camera input when reverse gear is engaged Automatic switching of the front camera when reverse gear is engaged for 10 seconds Distance lines for the reversing camera can be activated (not available for all vehicles) PDC can be activated (not available for all vehicles) Activation of image while driving (ONLY for network-connected video) NTS compatible video inputs BRAND AND MODEL : Land Rover Discovery 5xa0 model year from 2017 Discovery Sportxa0 model year from 2017 Range Roverxa0 model year 2017 Range Rover Sportxa0 model year 2017 Range Rover Evoquexa0 model year 2017-2019Navigation: Incontrol Touch Pro - 10.2-inch 24:9 monitor is NOT compatible with the Dual View monitor!Jaguar F-Pacexa0xa0from 2016 model year F-Typexa0xa0from 2016 model year XExa0xa0from 2016 model year XFxa0xa0from 2016 model year XJxa0xa0from 2016 model year Navigation: Incontrol Touch Pro - 10.2-inch 24:9 monitor is NOT compatible with the Dual View monitor!LIMITATIONS:Video only The interface does NOT transmit any audio signals. The existing factory AUX audio input or FM modulator can be used to power the audio signals. If 2 AV sources are connected, additional electronics are required for audio switching. Factory Rearview Camera: Automatically switches to RFK only as long as reverse gear is engaged. Additional electronics are required to delay downshifts. Aftermarket Front Camera: Switches to the front camera automatically after disengaging reverse gear for 10 seconds. Using the button it is also possible to manually switch to the front camera. PDC and Distance Lines Displaying PDC and distance lines does not work in all vehicles. Video Input Signal Only NTSC video sources compatible. CONNECTORS : Video insertion: 4+2pin HSD+2 Power supply and CAN bus: Plug Play (vehicle dependent) Video input (2x): RCA female connector Front camera input: RC female connector TECHNICAL DATA : xa0 Operating voltage xa0xa012 V DC (7 ~ 25 V) Standby current xa0xa011 mA Current consumption xa0xa0230 mA Video input xa0xa00.7 ~ 1 V Video input formats xa0xa0NTSC Operating temperature xa0xa0 -40°C to +85°C Video-box dimensions xa0xa0117 x 26 x 103 mm (W x H x D)