Universal cable for pioneer avh, dmh, sph 2022 radios

Universal Cable for Pioneer. To enjoy Pioneer radio and select your favorite hits or radio stations from your steering wheel, you'll need a suitable cable to connect your radio to the Stalk interface, i.e., the one above. If you're one of the lucky ones and have a control screen on your steering wheel, you're certainly one of those innovative drivers who embrace new solutions and ideas.xa0Morexa0Each radio and adapter requires a cable that's compatible with specific accessory brands. For example, connecting a Pioneer radio to the adapter requires a different cable than connecting a Kenwood radio. Installation is equally simple in all versions, using the input commonly known as a "mini jack." The cable is made of the highest quality materials, ensuring durability for many years. Headunit manufacturers use different connection options for the steering wheel remote control interface. Depending on the manufacturer and device, single-wire, two-wire, and multi-wire control, as well as control via the socket, can be used. The connection option can be found in the HU manufacturer's instructions. All connections must be made before connecting the interface to the vehicle. If necessary, the SWC function must also be programmed in the HU menu according to the HU manufacturer's instructions. Before final installation, check the functionality. Note: Connector: 12-pin Microfit > 3.5 mm Jack SWC acv SWC interface radio cable 42s xxxxx SWC Infodapter radio cable 43u xxxx Note: Red ring wire of the socket > BAT43 Schottky diode/blocking diode 0.2 A with cathode/ring side for Micro Fit plug Use case: Pioneer 3.5 mm connector Jack HU Application: 2021/2022 Pioneer units > with flat glossy metallic back panel Pioneer AVH Pioneer AVH-A240BT Pioneer AVH-A240DAB xa0 Pioneer DMH Pioneer DMH-A240BT Pioneer DMH-A241BT Pioneer DMH-A340DAB Pioneer DMH-A245BT xa0 Pioneer SPH Pioneer SPH-DA160DAB Pioneer SPH-DA360DAB