Underfloor heating manifold 8 circuits with thermal actuators NC AC230V and flow meters

Underfloor heating manifold 8 circuits with thermal actuators NC AC230V and flow meters. The set includes: Flush-mounted metal box with 8-circuit manifold, flow meters, NC AC230V thermal actuators and two venting units. Features: A manifold is used to control the flow of water in heated floors. Each pipe in the underfloor heating system is connected to the manifold, which allows you to regulate the water flow and the amount of heat in each room of the building separately. Electric thermal actuators are designed to control the heat distribution system of heating equipment. They receive commands from automation devices (such as room thermostats or controllers) and regulate the distribution of water flow according to set parameters. With the help of thermal actuators, it is possible to precisely control the temperature of the premises and reduce energy costs. The thermal actuators have a NC (normally closed) status. The actuators operate with programmable or non-programmable room thermostats that output an AC signal. Simple installation, the thermal actuators are connected to the manifold via the VA80 thread adapter. The VA80 valve thread adapter allows for easy connection to a standard M30 thread, securely locking. The power consumption of each actuator is only 2W. Flow meters (flow indicators) are included for monitoring water flow and pressure adjustment. Manual control heads (8 pcs.) are also included. The collector cabinet is mounted in the wall, flush-mounted. The door has a tongue, is locked, and opens at an angle of approximately 135 degrees. Technical data: Collector cabinet: Installation: flush-mounted. Dimensions: 745mmx645mmx118mm. Depth: 110mm. Door dimensions: 585mm x 685mm. Number of debit meters: 8 pcs. Number of thermal actuators: 8 pcs. Venting units: 2 pcs. Heating circuit pipe 16mm adapters: 8pcs. Color: light gray. Thermal drive: Purpose: water heating system. Thermal actuator operating type: NC (normally closed). Operating voltage: AC 230V, 50/60Hz. Starting current: max. 300mA. Power consumption: 2W. Installation: connected to the collector via an adapter. Adapter: VA 80. Cable length: 90cm. Operating temperature: 0°C~ +60°C. Storage temperature: -25°C~ +65°C. Operating humidity: < 80%RH (non-condensing). Safety class: IP54. Dimensions: Ø49.4mm x 56.6mm. Warranty:12 months