Underfloor heating manifold 10 circuits with thermal actuators NC AC230V and flow meters

Underfloor heating manifold 10 circuits with thermal actuators NC AC230V and flow meters. The set includes: Flush-mounted metal box with 10-circuit manifold, flow meters and NC AC230V thermal actuators.Features:The manifold is used to control the water flow in heated floors. Each pipe of the floor heating system is connected to the manifold, which allows you to regulate the water flow and heat amount in each room of the building separately. Electric thermal actuators are designed to control the heat distribution system of heating equipment. They receive commands from automation devices (such as room thermostats or controllers) and regulate the distribution of water flow according to set parameters. With the help of thermal actuators, it is possible to precisely control the temperature of the rooms and energy consumption. The state of thermal actuators is NC (normally closed). The actuators work with programmable or non-programmable room thermostats that issue an alternating current signal. Simple installation, thermal actuators are connected to the manifold via a VA80 thread adapter. The VA80 valve thread adapter allows for easy connection to a standard M30 thread, securely locking. The power consumption of each actuator is only 2W. Flow meters (flow indicators) are included for monitoring water flow and pressure adjustment. The collector cabinet is mounted in the wall, flush-mounted. The door has a tongue, is locked, and opens at an angle of 180 degrees.Technical data:Collector cabinet: Installation: flush-mounted. Height: 600mm. Width: 600mm. Depth: 110mm, with door 115mm. Door dimensions: 520mm x 635 mm. Number of flow meters: 10. Number of thermal actuators: 10. Color: light gray. Thermal actuator: Purpose: water heating system. Thermal actuator operating type: NC (normally closed). Operating voltage: AC 230V, 50/60Hz. Starting current: max. 300mA. Power consumption: 2W. Installation: connected to the collector via adapter. Adapter: VA 80. Cable length: 90cm. Operating temperature: 0°C~ +60°C. Storage temperature: -25°C~ +65°C. Operating humidity: < 80%RH (non-condensing). Protection class: IP54. Dimensions: 49.4mm (diameter) x 56.6mm. Color: white.Warranty:12 months