Nikon Z7 II, (Z7II), (Z 7 II), (Z 7II) + NIKKOR Z 24-70mm f / 4 S + FTZ II Mount adapter

Nikon Z 7II

Improved processing, greater versatility, yet familiar design - Nikon Z 7II takes everything that was great about the original camera and pushes it even further. Featuring a high-resolution 45.7-type FX-format BSI CMOS sensor and two EXPEED 6 image processors, the Z 7II is clearly aimed at image creators with a penchant for detail.

The sensor design eliminates the optical low-pass filter to capture more detail, and the sensor maintains a native sensitivity range of up to ISO 64 for rich, rich images. The updated processing also delivers faster speeds, including a 10fps continuous shooting speed and a larger buffer for working with moving subjects. UHD 4K 60p video is also supported, with the ability to record externally in 10-bit, using N-Log or HLG (HDR) modes. The sensor also houses a 493-point phase-detection AF system, which now supports Eye-Detect AF in wide-area AF modes and during movie recording, and allows focusing in low light down to -4.5 EV. In addition, 5-axis body vibration reduction helps reduce camera shake with any lens attached.

With the image balance in mind, the Z 7II retains the same overall physical design, but has been updated with a new dual memory card slot interface that accepts one CFexpress Type B card and one SD UHS-II card for more storage flexibility. A high-resolution 3.6 million-dot OLED electronic viewfinder and rear 3.2-inch 2.1 million-dot tilting touch LCD screen provide versatility for composing and playing back images, while SnapBridge wireless connectivity allows for remote camera control, image sharing with a mobile device, and even over-the-air firmware updates.

Firmware version 1.10 allows recording of UHD 4K image at 60p and 50p frame rates, enables raw image output to "Blackmagic Design Video Assist" external recording devices, and improves eye detection performance in Auto-Area AF and Wide-Area AF modes.

Second generation Z

Building on its initial efforts, Nikon has refined the Z 7 platform to offer greater speed, faster processing, and greater versatility without losing the beloved features of the original camera.

Dual EXPEED 6 image processors deliver increased buffer performance, a faster 10 fps continuous shooting speed, and noticeably shorter viewfinder blackout time.

The updated autofocus mode now features human and animal eye and face detection for wide-area AF, both when shooting stills and recording videos.

It is now possible to take time-lapse photos for up to 900 seconds (15 minutes) without using an external remote control.

Two memory card slots provide more flexible file storage options; one CFexpress Type B and one SD UHS-II slot allow for redundant, segregated, and repeat storage options.

The USB Type-C port allows for in-camera charging or continuous power supply for charging on the go or for extended shooting.

The direction of rotation of the lens focus ring can be changed according to your knowledge.

HDR (HLG) mode support, kai recorded externally, enables immediate playback of HDR-capable video files. N-Log mode can also be used for greater control after shooting and during editing.

An optional ProRes RAW upgrade is available, allowing the camera to output ProRes RAW footage to a compatible Atomos external recorder. This upgrade provides more color grading flexibility using the ProRes codec and the ability to output uncompressed 12-bit raw footage via HDMI. This upgrade will be available in early 2021.

SnapBridge wireless connectivity can be used to update camera software instead of relying on a memory card-based update system.

Creative shooting modes have been updated with multiple exposure, 20 different Picture Controls, and in-camera Timelapse recording. There's also a "Focus Shift" mode for recording up to 300 consecutive shots, kai shifting the focus position between exposures to allow for focus stacking programs.

Compatible with the optional MB-N11 power battery pack, which provides additional battery life and better control.

45.7 MP FX-format BSI CMOS sensor and two EXPEED 6 processors

45.7 MP BSI CMOS sensor is used for high-resolution photography, impressive quality in low light and fast scanning speed, which is useful for continuous shooting, movie shooting and time-lapse recording. The back-illuminated sensor design results in noticeably clean high-sensitivity output and reduced noise at high ISO values (up to native ISO 25600), as well as bright and smooth quality, kai sensitivity is only ISO 64. The sensor design also does not use a conventional optical low-pass filter to make the sensor as bright and clear as possible. The sensor benefits from two EXPEED 6 image processors, which ensure high speed throughout the camera system, including the ability to shoot continuously at 10 frames per second for up to 50 consecutive frames.

UHD 4K video recording

Using the sensor and processor capabilities beyond stills, the Z 7II is more than a capable multimedia camera. UHD 4K video recording up to 60p is possible, and Full HD 1080p video recording up to 120p is also supported for slow-motion playback. Video files can be recorded to the camera's built-in memory cards or as an uncompressed file to an optional external recorder via HDMI output.
The Z 7II is equipped with advanced imaging features, including an N-Log gamma function for capturing flat-looking footage that maximizes dynamic range, and an HLG (HDR) function for recording HDR-ready footage. Other additions include the ability to output high-quality 10-bit data via HDMI and an electronic VR function for smooth handheld filming. Focus Peaking can be used for manual focus control, and there is also a Zebra Stripes option to help detect overexposed areas of the frame. Audio recording can be done using the built-in stereo microphone or an optional external microphone can be connected via the 3.5mm stereo jack for better quality control, while live monitoring is possible via the headphone jack.
Firmware version 1.10 enables recording of UHD 4K images at 60p and 50p frame rates and enables raw image output to "Blackmagic Design Video Assist" external recording devices, and also improves eye detection performance in Auto-Area AF and Wide-Area AF modes.

493-point phase-detection AF system

An array of 493 phase-detection autofocus points is located on the sensor, covering 90% of the image area vertically and horizontally. This ensures fast and accurate focusing for both stills and movies, and the wide coverage area allows subject tracking right to the edges of the frame. Hybrid AF is available for movies, which automatically switches between phase and contrast detection systems for smooth focusing during movie recording. The latest NIKKOR Z lenses are also optimized for quiet operation.

Vibration reduction

In-body 5-axis sensor-shift vibration reduction compensates for up to 5 stops of camera shake, regardless of the Z-mount lens used. This system also works with compatible F-mount lenses, using the optional FTZ adapter, which uses 3-axis stabilization.

Housing construction

The large 3.2-inch 2.1 million-dot LCD screen provides bright, clear and vivid image playback and live view shooting. The screen features a tilting design for comfortable viewing from both high and low angles, and is touch-sensitive for more intuitive operation, navigation and settings.

There's a 3.6m-dot OLED electronic viewfinder for comfortable eye-level viewing. It has a high 0,80x magnification and uses NIKKOR optics for bright, clear images. The viewfinder is also coated with a fluorine coating for easy cleaning.

The top panel of the Z 7II features a dot matrix OLED display. This low-power display provides quick access to important camera settings.

One CFexpress B/XQD type memory card slot and one UHS-II SD card slot are configured, allowing for flexible file storage - redundant, overflow, or separated storage methods can be used.

The rugged magnesium alloy body is dust and weather resistant for comfortable operation in harsh climates and adverse conditions.

The ergonomic grip and overall shape are designed for extended use, further enhanced by the non-slip material and control lever for smooth adjustment of settings and focus point selection.

SnapBridge connectivity is built in for seamless low-resolution image transfer, as well as remote shooting capabilities. BLE (Bluetooth Low Energy) and Wi-Fi allow communication between the camera and smart device, and the mobile device can remotely trigger the shutter and display the Live View image from the camera for remote work. SnapBridge can also be used as an easier way to update the camera's software.