Steering wheel control adapter for Mercedes Vito (w447) 2015- ctsmc012.2

Retain the steering wheel control functions when replacing your factory radio with an aftermarket radio. Please compare the wiring harness connectors shown with those in your vehicle and ensure they match visually and technically. Please also check whether the replaced OEM head units are originally fitted to your vehicle. Note: Note: xa0 CAN bus connector: +12V DC yellow terminal 30 vehicles with radio preparation Before installation, check the CAN bus connection and the ISO plug assignment: xa0 Incorrect connection will damage the interface xa0 ISO plug with assignment: Pin 7 : +12V Ignition current terminal 15 pin 6: +12V lighting terminal 58 xa0 CAN bus connector: located in the air conditioning system xa0 Vehicles with OEM camera: Reversing camera adapter Fakra(m)>RCA(m) OEM camera > article: 00315 vehicles with E-Call function: E-Call retention function Mercedes Sprinter / V-Class > article: 08772 reverse gear signal not supported: reverse gear signal > +12V cable driver side 1.5mm² white/blueMake and model: Mercedes Vito (W447) 10. 2014 - 02.2019 Mercedes Vito (W447) 05.2019 - 2023Steering wheel control *In case of incorrect operation of the interface, if possible, code the vehicle to the OEM Audio 15 device, if possibleFeatures and advantagesAllows you to install a non-factory OEM radio and retain the factory steering wheel control buttonsSafety: Allows you to keep your hands on the steering wheel and focus on driving the carPlug and Play, no wire cutting requiredRetains the original vehicle functions such as date, time and temperature displayFor interfaces where phone buttons are supported, the interface allows you to answer / hang up a call in Bluetooth mode: Alpine, Clarion, Kenwood, Pioneer and ZENEC.