SONOFF SNZB-03P Motion Sensor, Zigbee

SONOFF SNZB-03P Smart Motion Sensor, Zigbee
SONOFF smart home system allows you to control your electrical appliances remotely with the EWeLink app or by voice with Amazon Alexa or Google Home. It allows you to create different scenarios, group appliances by switching on/off multiple devices with a single touch, set timers and schedules, monitor the status of your devices in real time, and share their control. Link your eWeLink with IFTTT application and extend your scene capabilities. Thanks to configurable local LAN support Sonoff smart home system can work without a cloud server.

Features:
SONOFF SNZB-03P is a Zigbee motion sensor designed to automate and protect your home. Wireless and compact, battery-powered, it can be installed wherever you want.
The device detects motion up to 6 meters away at an angle of 110 degrees every 5 seconds and can send messages to your smart device. Depending on the selected settings and connected devices, when motion is detected, the lighting can be changed, the music player can be started, the camera for video recording can be turned on, etc. This device can automatically turn on the lights when you pass by and turn them off when you leave the room, helping to save electricity and increase the comfort of everyday life. The smart sensor reacts to light and determines whether the ambient light is sufficient, so it does not automatically turn on the lights during the day.
Used for security purposes, the sensor can activate a video camera or a deterrent signal when it detects unauthorized entry and send you a warning message.
The SONOFF SNZB-03P sensor is compatible with SONOFF Zigbee devices such as NSPanel Pro, iHost, ZB Bridge Pro, ZBDongle-E, but also supports other Zigbee hubs such as SmartThings Hub V3, AeoTec Smart Home, Echo Plus 2nd Generation, Echo 4th Generation or Echo Show 2nd, so it can be easily integrated into an existing smart home system.
Easy installation and control. The small and compact sensor is easy to apply. Attached with 3M adhesive or screws, the sensor can be glued directly to the desired surface without damaging it. It also has a magnetic suction design, so it can stick anywhere and rotate at any angle.
The free mobile app eWeLink (Android, IOS) is used for settings. Since it is also compatible with the SmartThings hub, it can also be controlled using the SmartThings app (Android, IOS).
Voice control via Google Assistant or Amazon Alexa is supported.
This device can be combined with various other products to complete smart home scenarios.
The sensor is especially suitable for corridors, entrances, staircases, where people only stop for a short time and there may be no electrical outlets.


Notes:
The sensor responds to temperature interferences, so avoid installing it near heat sources, air conditioners, or direct sunlight. It can detect objects with a temperature similar to human body temperature, such as pets. Please avoid outdoor installation and under rotating objects.
The installation surface should be solid without vibration.
Install the sensor in the places where an intruder may pass easily.
NOTE: ZigBee hubl is required for the device to function.


Technical specifications:
Compatible with: Sonoff ZBDongle-P, ZBDongle-E, NSPanel Pro, ZBBridge, ZBBridge Pro, iHost, etc.
Detection distance: 6 m.
Detection angle: 110°.
Wireless connection: Zigbee 3.0 (IEEE802.15.4).
Power supply: 3V battery CR2477.
App: eWeLink (Android, iOS).
Works with Amazon Alexa, Google Assistant, Alice.
Operating temperature: -10°C~+60°C.
Operating humidity: 5%-95%RH (non-condensing).
Material: PC.
Color: white.
Dimensions: 44x44x65mm.
Weight: 54g.


Warranty: 24 months.