Z-Wave input module with four inputs for controlling scenarios and automations via connected smart home devices. It operates on 5-24 V DC power supply, supports Z-Wave Plus and Long Range communication, and its dimensions are 37 × 42 × 16 mm.
Z-Wave input module with four inputs for controlling scenarios and automations via connected smart home devices. It operates on 5-24 V DC power supply, supports Z-Wave Plus and Long Range communication, and its dimensions are 37 × 42 × 16 mm.


Z-Wave input module with four inputs for controlling scenarios and automations via connected smart home devices. It operates on 5-24 V DC power supply, supports Z-Wave Plus and Long Range communication, and its dimensions are 37 × 42 × 16 mm.
Guarantee
24 month
Delivery from Europe in
15 - 16
business days
Z-Wave input module with four inputs for triggering scenarios and automations via connected smart home devices. Supports 5-24 V DC power supply, Z-Wave Plus and Long Range communication. Dimensions - 37 × 42 × 16 mm.
Product information | |
|---|---|
| Product type | Z-Wave input module for smart home switches |
| Brand | Shelly |
| Model | Wave i4 |
| Function | Reads signals from regular wall switches and triggers scenarios, automations, and synchronized actions on compatible Z-Wave devices |
| Relay | Not included; input module only |
| Color | Yellow |
| Weight | 17 grams |
Technical specifications | |
| Power supply | 5-24V DC |
| Inputs | 4 |
| Multi-click actions | Up to 16 |
| Wireless technology | Z-Wave Plus and Z-Wave Long Range |
| Z-Wave platform | 800 series Z-Wave chip |
| Long range frequency | 864MHz |
| Mixed network frequency | 868.4MHz |
| Mixed network operating range | Up to 40 m indoors |
| Long-range network | Up to 80 m indoors or up to 1,000 m outdoors, depending on conditions and compatible equipment |
| Maximum transmission power | < 25mW |
| Energy consumption | < 0.3W |
| Safety | "Z-Wave Security 2" (S2) with AES-128 encryption |
| Setup and updates | SmartStart and over-the-air (OTA) firmware updates |
Construction and installation | |
| Dimensions | 37 × 42 × 16 mm |
| Housing material | Plastic |
| Installation | In a flush-mounted box, behind a regular wall switch |
| Compatible conductor cross-section | 0.5-1.5 mm² (20-16 AWG) |
| Stripped wire length | 5-6mm |
| Maximum terminal screw torque | 0.4 Nm |
Terms of Use | |
| Ambient temperature | −20-40 °C |
| Relative humidity | 30-70% |
| Maximum installation height | 2,000 m above sea level |
Safety warning | |
| Electrical safety | Installation and wiring work must be performed by a qualified person with the power disconnected. Use only with a 5-24 V DC power supply and comply with the specified environmental and wiring parameters. The module is designed to read switch inputs and control compatible Z-Wave devices; it does not directly switch electrical loads. |
| Height | 50mm |
| Length | 100mm |
| Weight | 30 g |
| Width | 100mm |