Sensor kit for camera and LCD display TRUCK 19mm AMIO-04073

The camera sensor kit is the base for which you need to choose one of our LCD displays (P/N: 01020 or P/N: 02484) and one camera from our wide range.

It is also possible to connect to a radio that is equipped with the PAL/NTSC system.

Parking Assistant is a device that aids in parking and reversing. A universal and proven device for those who value road safety. The device is simple and functional, and activates automatically. Thanks to ultrasonic sensors, you'll never hit anything with your car again. When reversing or parking, the device accurately recognizes obstacles on the road and warns the driver with a sound signal (appropriate for the distance from the obstacle), as well as information displayed on the screen.

Device specifications

• 12V DC power supply
• Power consumption <4W
• Operating frequency: 40KHz
• Device operating temperature -30°C to +55°C
• Obstacle detection 2.5 - 0.3m
• Measurement error +/- 5cm
• Sensor cable length: 2.2m
• Cable length from the display: 5m

The composition of the set

• TFT control unit with connection to the display and camera
• sensors
• wiring
• user manual

The kit includes sensor sensors that can be placed in any configuration at the front or rear of the car, thus increasing safety in your vehicle.

The sensors are activated automatically when reverse gear is engaged for the rear sensors, or by pressing the brake pedal for the front sensors. The control unit is factory-calibrated.

The front sensors are activated by pressing the brake pedal (igniting the brake lights). After pressing and releasing the brake pedal, the sensors remain active for 15 seconds. The system activates when an obstacle is detected within 80 cm of the vehicle.

Obstacle detection is signalled by a distance indication, a graphical indication and, additionally, a sound via the built-in speaker.

Zest