PoE hub 8*100Mbps PoE ports and 2 Uplink 1000Mbps, Port1-60W, Port2-8-30W, Total-96W

PoE hub 8*100Mbps PoE ports and 2 Uplink 1000Mbps, Port1-60W, Port2-8-30W, Total-96W
• 10-port unmanaged gigabit switch with 8-port PoE.
• 8-pin simultaneous PoE power supply (1/2/4/5 positive, 3/6/7/8 negative). Signal lines and idle lines supply power at the same time.
• Improved compatibility with IPC. Reduced cable loss. Increased charging capacity.
• 2 types of transmission modes (Extended mode on / Extended mode off).
• Red port supports IEEE802.3bt and Hi-PoE standards, max. 90 W.
• Smart PoE manages power consumption and offers real-time monitoring.
• Innovative "PoE Watchdog" can be activated by dialing a number or activating a WEB page switch.
• Desktop installation is supported.< br /gt; • Supports IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x standards.
• Complies with IEEE802.3af and IEEE802.3at power supply standard.
Technical specifications:
• Model PFS3010-8GT-96.
• Ethernet port: 8x 10/100/1000Mbps, Uplink 2x 10/100/1000Mbps; PoE Ports: 8x 10/100/1000Mbps.
• PoE Power Consumption: Full Load = 96W, Idle: 3W.
• Power Consumption Management: Yes.
• PoE PIN Assignment: 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-).
• Communication Standards: IEEE802.3; IEEE802.3u; IEEE802.3x; IEEE802.3ab.
• PoE Protocol: IEEE802.3af; IEEE802.3at; Hi-PoE; IEEE802.3bt.
• Switching capacity: 20 Gbps.
• Packet forwarding rate: 14.88 Mpps.
• Packet buffer memory: 1.5 Mbit.
• MAC table size: 4K.
• Long range PoE: 250 m PoE transmission distance.
• Operating humidity: 5% ~ 95%.
• Power supply: 48V - 57V DC.
• Lightning protection Common mode: 4 kV.
• Differential mode: 2 kV.
• ESD protection Air discharge: 8 kV.
• Contact discharge: 6 kV.
• Operating temperature: - 10°C~55°C.
• Weight: 0.5 kg.
• Dimensions (W × D × H): 190 mm × 100 mm × 30 mm.
Transmission performance:
Supply voltage is 53 V.
CAT5E/CAT6. Max. DC resistance < 10ohm/100m
Cable (m) - Load (W) - Bandwidth (Mbps)
IEEE802.3bt 90W:
100m cable; 71.3 W load; 1000 Mbps bandwidth.
150 m cable; 62W load; 10Mbps bandwidth.
200m cable; 51W load; 10Mbps bandwidth.
250m cable; 40W load; 10Mbps bandwidth.
Hi-PoE 60W:
100m cable; 53W load; 1000 Mbps bandwidth.
150 m cable; 50W load; 10Mbps bandwidth.
200m cable; 47W load; 10Mbps bandwidth.
250m cable; 37W load; 10Mbps bandwidth.
IEEE802.3at 30W:
100m cable; 25.5 W load; 1000 Mbps bandwidth.
150 m cable; 25,5W load; 10Mbps bandwidth.
200m cable; 25,5W load; 10Mbps bandwidth.
250m cable; 25,5W load; 10Mbps bandwidth.
Note: The actual transmission distance may vary due to the power consumption of the connected devices or the type and condition of the cable.