PoE hub 8*1000Mbps 8 PoE ports, Total-96W, BT 90W

PoE hub 8*1000Mbps PoE ports, Total-96W, BT 90W
Features:
• 8-port unmanaged switch with 8-port PoE.
• All giga ports with large buffer memory, allowing high-definition large traffic to be achieved.
• Long-distance PoE: When selecting or enabling long-distance transmission in the WEB interface, the transmission distance of the PoE port can be up to 250m, meeting the requirements of wired transmission (bandwidth reduced to 10Mbps).
• 8-pin simultaneous PoE power supply (1/2/4/5 positive, 3/6/7/8 negative). The signal lines and idle lines supply power at the same time.
• The red ports support IEEE802.3af, IEEE802.3at, IEEE802.3bt and Hi-PoE standards with a maximum output power consumption of 90W per port. Suitable for powering high-power devices.
• Smart PoE manages power consumption and offers real-time monitoring.
• Innovative "PoE Watchdog" can be activated by dialing a number or by activating the WEB page switch.
• Desktop installation is supported.
• IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3az standards are supported.
• Compliant with IEEE802.3af and IEEE802.3at power supply standard.
Technical specifications:
• Model PFS3008-8GT-96.
• PoE ports: 8x 10/100 /1000Mbps.
• PoE power consumption: full load = 96W, idle: 3W.
• Power consumption control: yes.
• PoE PIN assignment: 1, 2, 4, 5 (V+ ), 3, 6, 7, 8 (V-).
• Communication standards: IEEE802.3; IEEE802.3u; IEEE802.3x; IEEE802.3az; IEEE802.3ab.
• PoE protocol: IEEE802.3af; IEEE802.3at; Hi-PoE; IEEE802.3bt.
• Switching capacity: 20 Gbps.
• Packet forwarding rate: 11.9 Mpps.
• Packet buffer memory: 1.5 Mbit.
• MAC table size: 8K.
• Long range PoE: 250 m PoE transmission distance.
• Operating humidity: 5% ~ 95%.
• Power: 48V - 57V DC.
• Lightning protection Common mode: 2 kV.
• Differential mode: 0.5 kV.
• Static air discharge protection: 8 kV.
• Contact discharge: 6 kV.
• Operating temperature: - 10°C~55°C.
• Weight: 490 g.
• Dimensions (W×D×H): 190 mm × 100 mm × 30 mm.
Transmission performance:
Supply voltage is switched 53 V.
CAT5E / CAT6. Max. DC resistance lt;10ohm/100m
Cable (m) - Load (W) - Bandwidth (Mbps)
IEEE802.3bt 90W:
100m cable; 71.3 W load; 1000 Mbps bandwidth.
150 m cable; 62W load; 10Mbps bandwidth.
200m cable; 51W load; 10Mbps bandwidth.
250m cable; 40W load; 10Mbps bandwidth.
Hi-PoE 60W:
100m cable; 53W load; 1000 Mbps bandwidth.
150 m cable; 50W load; 10Mbps bandwidth.
200m cable; 47W load; 10Mbps bandwidth.
250m cable; 37W load; 10Mbps bandwidth.
IEEE802.3at 30W:
100m cable; 25.5 W load; 1000 Mbps bandwidth.
150 m cable; 25.5W load; 10Mbps bandwidth.
200m cable; 25.5W load; 10Mbps bandwidth.
250m cable; 25.5W load; 10Mbps bandwidth.
Note: The actual transmission distance may vary due to the power consumption of the connected devices or the type and condition of the cable.