-
−16%
"Meross CS11-EU" - a battery-powered detector with photoelectric smoke and electrochemical carbon monoxide sensors. It emits an 85 dB audible signal, has LED status indicators and operates for up to 10 years thanks to the integrated CR123A battery.
"Meross CS11-EU" - a battery-powered detector with photoelectric smoke and electrochemical carbon monoxide sensors. It emits an 85 dB audible signal, has LED status indicators and operates for up to 10 years thanks to the integrated CR123A battery.
Guarantee
24 month
Delivery from Europe in
15 - 16
business days
The "Meross CS11-EU" is a battery-powered detector with photoelectric smoke and electrochemical carbon monoxide sensors. It emits an 85 dB audible alarm, has LED status indicators, and can operate for up to 10 years with an integrated CR123A battery.
Product information | |
|---|---|
| Product type | Combined smoke and carbon monoxide detector |
| Brand | Meross |
| Model | CS11-EU |
| Color | White |
| Design | Compact, round, wireless body |
Technical specifications | |
| Smoke sensor | Photoelectric |
| Carbon monoxide sensor | Electrochemical |
| Power supply | Built-in 3 V CR123A lithium battery, 1600 mAh, non-replaceable |
| Standby current | < 30 µA |
| Alarm current | < 70 mA |
| Smoke sensitivity | 0.09-0.17 dB/m |
| Carbon monoxide detection | 50 ppm: 60-90 minutes; 100 ppm: 10-40 minutes; 300 ppm: less than 3 minutes |
| Low battery voltage limit | 2.6 ± 0.1 V |
| Operating temperature | −10-40 °C |
| Operating humidity | 15-95% relative humidity, non-condensing |
Operation and indication | |
| Statuses indicator | Three-color LED: green - normal operation, yellow - low battery or fault, red - alarm or test |
| Test and silence control | One-button control |
| Alarm silence duration | Approximately 10 minutes |
| Mounting | Mounts to wall or ceiling using the included bracket and screws |
Compliance and scope of delivery | |
| Standards | EN14604:2005/AC:2008 and EN50291-1:2018 |
| Package includes | Detector, mounting bracket, screws and operating instructions |
| Safety warning | Use only as a smoke and carbon monoxide detector. Install and test the device in accordance with the operating instructions. This detector is not a substitute for safe use of appliances, regular maintenance or an emergency preparedness plan. Do not disable or cover the sensors. Replace the detector when the non-replaceable battery is exhausted or the device has reached the end of its service life. |
| Height | 50 mm |
| Length | 150 mm |
| Weight | 300 g |
| Width | 150 mm |