Air purifier - ANYCUBIC AirPure 2.0 49.86 CFM 45 dB 12 W
Product reference:
14-5905156104648
" Anycubic AirPure 2.0" - a ventilation system for 3D printers that continuously removes fumes from the print chamber through an exhaust hose. Provides 49.86 CFM of airflow, operates at a noise level of approximately 45 dB and consumes approximately 12 W of power.
Air purifier - ANYCUBIC AirPure 2.0 49.86 CFM 45 dB 12 W
Product reference:
14-5905156104648
" Anycubic AirPure 2.0" - a ventilation system for 3D printers that continuously removes fumes from the print chamber through an exhaust hose. Provides 49.86 CFM of airflow, operates at a noise level of approximately 45 dB and consumes approximately 12 W of power.
You have 3 products in compare list, please remove someone and try again
- Add to favorites products
- Added to favorites products
- Removed to favorites product
Guarantee
24 month
Delivery from Europe in
15 - 16
business days
ANYCUBIC AirPure 2.0
" Anycubic AirPure 2.0" - a ventilation system for 3D printers that constantly removes fumes from the printing chamber through an exhaust hose. The air flow reaches 49.86 CFM, operating noise is about 45 dB, and power consumption is about 12 W.
- A continuous ventilation system for 3D printers that helps remove vapors and gases from the print chamber
- Up to 49.86 CFM of airflow ensures efficient air extraction during long printing sessions
- Compatible with " Anycubic Photon P1" and, when properly configured, can be used with one or two printers
- Energy-saving operation with a consumption of about 12 W and a noise level of about 45 dB
Product information | |
|---|---|
| Product type | Ventilation and fume extraction system for 3D printers |
| Brand | Anycubic |
| Model | AirPure 2.0 |
| Compatible printer | Anycubic Photon P1 |
Technical specifications | |
| Rated voltage | 100-240V, 50/60Hz |
| Power adapter output | 12V / 1A |
| Fan speed | 3,800 ±10% rpm |
| Operating temperature | 8-40 °C |
| Operating humidity | 20-90% |
Complete set | |
| Contents |
|
Installation information | |
| Installation | The unit can be placed near a ventilation opening or installed so that the air is discharged through a window. |
| Additional requirements | Depending on the type of window, window sealing or installation accessories may be required. Check the compatibility of the hose and opening before installation. |
Safety warning | |
| Usage | Use only to ventilate print chambers of compatible 3D printers. Safely vent exhaust air to the outside or into a suitable ventilation system. Do not use the device if the hoses are blocked or improperly connected. |
| Height | 300mm |
| Length | 400mm |
| Weight | 1600g |
| Width | 250mm |
Offensive and promotional comments are unpublished.
Testimonials not found!
Request for product delivery/order
x