Reversing camera dedicated to honda cr-v

A shock-resistant rearview camera designed for the Honda CRV. The camera replaces the license plate light. The device connects to any monitor with a video input. The monitor displays an image with a scale indicating the distance to an obstacle. Sensor: 1/3" CMOS System: NTSC Horizontal resolution 420TVL Effective pixels: 510*492 Sensitivity: 0.4lux / F1.2 Signal to noise ratio: >48dB Gain control: AGC Backlight compensation: BLC Shutter speed: 1/50-1/100000s Lens angle of view: 170° Horizontal angle of view: 130-140° Mirror function: The image is seen as in a rear-view mirror with a scale that makes it easier to assess the distance Length of the camera power cable: 1.5m Length of the included video cable: 5.5m IP protection rating: IP67 Video output: 1.0Vp-p, 75 ohm 1.0Vp-p, 75 ohm Power supply: 12V Current consumption: 130-150mA Operating temperature: xa0-20 up to +75°C Storage temperature: xa0-30 to +85°C Housing material Polycarbonate Reversing camera for the Honda CR-V. For some, especially older, car models, a reversing camera is not available as a factory option. However, you can install one yourself at any time. For the Honda CR-V, we recommend the reversing camera for the Honda CR-V from the Car-Tronic online store. Image with scale and distance to obstacle. The reversing camera for the Honda CR-V is designed to be installed instead of the license plate light. This simple move will open up many new possibilities for you - on your monitor, you will see the image from the rear of the car, as well as a scale showing the distance between the car and the obstacle. All you need is any monitor with a video input. You don't have to worry about the camera's physical durability - it is highly shock-resistant. More technical details below.