Reversing camera activator for Audi, VW MMI, RCD 510

To install a reversing camera interface or an AV interface with a reversing camera input, it is necessary to activate the navigation reversing camera input. Activation can be performed using an activator. Suitable for retrofitting OEM rear view cameras Low version. After first use in a vehicle, the activator of that vehicle (head unit) is activated and the coding or uncoding can be repeated for that vehicle without restrictions. Also suitable for vehicles with factory OPS. Limitations: Coding: No reversing camera can be coded to the diagnostic interface/Gate 19! Rear camera: only compatible with NTSC cameras. Not suitable for vehicles without factory PDCA. The activator activates the factory input for the reversing camera. Cars equipped with Audi navigation - MIB MMI NavigationSEAT - Media/NaviSystem Plus 8"VW/SKODA - MIB/MIB2 Standard/Composition, Media 5.8" or 6.5 inch, RNS315, RNS510, Columbus, Trinax, RCD510, BoleroModeleAudi A3 (8V) 05/2012 -> Audi A4 (B9) 08/2015 -> Audi A5 (F5) 07/2016 -> Audi A6 (4G) 09/2014 -> Audi A7 (4G) 05/2014 -> Audi Q2 (GA) 09 / 2016 -> Audi Q5 (FY) 01/2017 -> Audi Q7 (4M) 03/2015 ->Skoda med Bolero (Composition Media)/Columbus (Discover Pro):Skoda Fabia 2015 -->Skoda Octavia 2013 - 2016Skoda Rapid 2015 - 2016Skoda Superb 2016 - 2017Skoda Yeti 2015 --> Volkswagen med Composition Media/Discover Pro:Volkswagen Crafter 2017 -->Volkswagen Golf 2013 - 2017Volkswagen Golf Sportsvan 2014 - 2017Volkswagen Passat 2015 - 2017Volkswagen Polo 2015 - 2017Volkswagen Tiguan 2016 - 2017Volkswagen Touran 2016 - 2017 Important Note: All modules that operate through the vehicle's OBD diagnostic connector via software, such as TV activation or other software settings, can only be used in one vehicle. The OBD module reads the VIN on first use, thereby blocking use in another vehicle. For this reason, OBD modules are excluded from replacement.MIBMMI navigation models