eSUN PLA-LW

eSUN PLA-LW. Printing material: Polylactic acid (PLA), Printing colours: Black, Print speed: 300 mm/sec. Weight: 1 kg, Diameter: 1.75 mm. Quantity per pack: 1 pc(s)
Light weight pla filament is a material specially developed for aeromodelling. The interlayer bonding is stable, and the foaming rate and strength can be controlled by adjusting the printing temperature. PLA-LW use active foaming technology to achieve lightweight, low-density PLA parts, the foaming volume ratio is 220%, and the density is as low as 0.54g/cm3.
Foaming makes the layered pattern almost invisible, and the surface of the printed item is matte and delicate. Under the same model and at the same speed, the Light weight pla filament enables the model aircraft to have a lighter wing load and a lower stall speed, which can greatly improve the performance of the model aircraft.

Features

Printing material: Polylactic acid (PLA)
Printing colours: Black
Print speed: 300 mm/sec
Impact strength: 8.58 kJ/m²
Flexural modulus: 1701 MPa
Flexural strength: 41.31 MPa
Maximum extruder tip temperature: 270 °C
Elongation at break: 68.9%
Minimum extruder tip temperature: 190 °C
Tensile strength: 32200 kPa
Bulk density: 1.2 g/cm²

Weight dimensions

Weight: 1 kg
Diameter: 1.75 mm

Packaging data

Quantity per pack: 1 pc(s)