eSUN EPLA+HS

eSUN ePLA+HS. Printing material: Polylactic acid plus (PLA+), Printing colours: Purple, Colour name: Very Peri. Weight: 1 kg, Density: 1240 kg/m³, Diameter: 1.75 mm. Quantity per pack: 1 pc(s)
ePLA+HS
Fast printing requires materials that can melt and cool quickly. However, to balance the speed of material melting and cooling, the physical properties of materials printed using fast techniques usually experience some decline. In order to provide 3D printed products with superior mechanical performance under fast printing conditions, we have conducted numerous tests on various rapid formulations. As a result, we have selectively chosen ePLA+HS, also known as ePLA+HS, which is specifically designed to match high-speed printing and offers enhanced toughness.

Features

Printing material: Polylactic acid plus (PLA+)
Colour name: Very Peri
Printing colours: Purple
Opacity: Opaque
Print speed: 350 mm/sec
Impact strength: 4.1 kJ/m²
Flexural modulus: 2695 MPa
Flexural strength: 78 MPa
Maximum extruder tip temperature: 230 °C
Elongation at break: 17.5%
Minimum extruder tip temperature: 210 °C
Tensile strength: 59000 kPa
Build plate temperature: 45 - 60 °C

Weight dimensions

Density: 1240 kg/m³
Weight: 1 kg
Diameter: 1.75 mm

Packaging data

Quantity per pack: 1 pc(s)