eSUN ABS+HS

eSUN ABS+HS. Printing material: ABSplus, Printing colours: Orange, Print speed: 300 mm/sec. Weight: 1 kg, Diameter: 1.75 mm. Quantity per pack: 1 pc(s)
ABS+HS is a modified version of ABS material. Compared to conventional ABS, it exhibits lower shrinkage and superior interlayer adhesion, reducing the likelihood of warping and cracking during printing. It contains low VOC (Volatile Organic Compounds) components, resulting in a reduced odor during the printing process, making it more comfortable and stress-free. This material is optimized for high-speed printing, maintaining its performance even at higher speeds, providing an excellent printing experience. Additionally, it can be acetone polished to eliminate layer lines and further enhance the print quality.

Features

Printing material: ABSplus
Printing colours: Orange
Print speed: 300 mm/sec
Impact strength: 20 kJ/m²
Tensile modulus: 28 MPa
Flexural modulus: 1477 MPa
Flexural strength: 46 MPa
Maximum extruder tip temperature: 270 °C
Elongation at break: 3.9%
Minimum extruder tip temperature: 230 °C
Tensile strength: 28000 kPa
Bulk density: 1.04 g/cm²

Weight dimensions

Weight: 1 kg
Diameter: 1.75 mm

Packaging data

Quantity per pack: 1 pc(s)