UPS Blacktec BT RT 11 2k -C 2000 VA / 2000 W 48V

UPS Blacktec BT RT 11 2k-C - 2000 VA / 2000 W

is an uninterruptible power supply technology On-Line VFI (Voltage and Frequency Independent), designed to protect critical IT systems and network infrastructure. The RT design allows for installation in both 19" rack cabinets and in a free-standing (tower) configuration, while maintaining full functionality.
The Blacktec BT RT 11 2k-C 2000 VA / 2000 W UPS is perfect for:

• server rooms and 19" rack cabinets


• network and telecommunications infrastructure,


• monitoring and security systems (CCTV, NVR, routers, switches),


• industrial automation and control systems,


• sensitive IT and medical equipment (after taking into account relevant industry standards).

The most important advantages

• On-Line VFI Technology — Double conversion ensures full output isolation from network interference, guaranteeing continuous, stable and clean power for sensitive IT devices, servers, telecommunications equipment and medical equipment.


• Wide input voltage range 80-300 V — The UPS operates reliably in installations with frequent voltage sags and swells. A wide input range reduces the need for battery backups, extending battery life and improving system reliability.


• Programmable socket management — Intelligently controlled output groups allow you to assign power priorities and decide which devices will be supported first.

Power factor 1.0 and high power quality

Output power factor PF = 1.0 means that UPS delivers full 2000 W active power at 2000 VA apparent power. Low input current distortion ( THDi ≤ 5% ) limit network interference and reduce the risk of affecting other receivers.

Wide input range and generator operation

Thanks to the input voltage range 80-300V The UPS operates stably in difficult power conditions and can be safely powered from power generator This increases energy independence and ensures continuous operation even in emergency situations.

Key features of the system

• Technology: On-Line VFI (double conversion)


• Power: 2000 VA / 2000 W (power factor 1.0)


• Wide input range: 80-300V


• Outputs: 8 × IEC sockets (programmable socket groups)


• ECO mode: energy saving mode for higher efficiency


• Generator compatible: possibility of working with a power generator


• HID USB communication: detected by the system like a standard UPS, with the ability to monitor and automatically shut down the system


• EPO (Emergency Power Off) port: emergency power off with one signal in accordance with safety and fire protection procedures


• Autonomous battery modules with their own charger: each module is charged independently, which shortens charging time and increases reliability


• Total Harmonic Distortion (THDi) ≤ 5%: low input current distortion reduces network load and the risk of interference


• Easy battery replacement: the design allows for quick removal and replacement of batteries without long downtime


• RT version with rotating LCD: the display can be rotated depending on the mounting method (rack / tower), which always ensures convenient reading of parameters


• Programmable socket management: the ability to define power priorities and disconnect less important receivers during battery operation

Technical specifications

• Parameters / Model: Blacktec BT RT 11 2k-C - 2000 VA / 2000 W

Entry

• Nominal voltage: 208 / 220 / 230 / 240 VAC


• Voltage range: 80 - 300 VAC


• Frequency range: 40 - 70 Hz


• Harmonics (THDi): ≤ 5% nominal input voltage


• Power factor: ≥ 0.99 at rated voltage (100% load)

Exit

• Output voltage: 208 / 220 / 230 / 240 VAC


• Voltage regulation (battery mode): ±1%


• Frequency range (synchronized): 50Hz / 60Hz


• Frequency adjustment (battery mode): 50 or 60 Hz ±0.5 Hz


• Crest Factor: 3:1 (max.)


• Harmonic distortion: ≤ 5% THD (non-linear load)


• Switching time: 0 ms (AC → battery), approx. 4 ms (inverter → bypass, typical)


• Voltage waveform (battery mode): sinusoidal (≤ 5% THD, non-linear load)

Battery

• Battery type/quantity: 12V / 9Ah × 4


• Backup time at 50% load: approx. 9 min (internal batteries)


• Charging current: 1.5 A


• Standard charging time: approx. 4 hours to 90% capacity (charging current approx. 2 A)

Dimensions and weight

• Dimensions (W x D x H): 438 × 430 × 88 mm


• Net weight (without batteries): 17.15 kg


• Net weight (with built-in battery): 21 kg


• Total number of UPS sockets: 8 × IEC C13 (4 programmable)

Control panel

• Networking: messages on the LCD display


• Battery operation: messages on the LCD display


• Malfunction: messages on the LCD display

Efficiency

• Inverter mode: 90%


• ECO mode: 95%


• Battery mode: ≥ 90%

Safeguard

• Full protection: protection against short circuit, overload, discharge and overcharge

Environment

• Relative humidity: 20-90% RH @ 0-40°C (non-condensing)


• Noise: less than 45 dBA at 1 meter

Management

• Ports and connectors: EPO, RS-232, smart slot, USB, external battery connector


• SNMP / supported systems: Windows Server; Windows 7 / 8 / 10 / 11 (32 64 bit), Windows Hyper-V 2012 / 2022, Windows SBS 2011 (32 64 bit), Linux ESXi 4.x / 5.x / 6.x / 7.x / 8.x, Mac OS 10-11

Standards

• EMC: EN IEC 62040-2:2018 / EN IEC 61000-3-2:2019