UPS Blacktec BT RT 11 1k -C 1000 VA / 1000 W 24V

UPS Blacktec BT RT 11 1k-C - 1000 VA / 1000 W

is an advanced emergency power supply type line-interactive / rack-tower (RT) with the possibility of mounting both in a 19" rack cabinet and in a free-standing position. It provides full power protection for servers, network devices, telecommunications systems and critical IT installations.
UPS Blacktec BT RT 11 1k-C 1000 VA / 1000 W is ideal for:

• server rooms and data centers,


• 19" rack cabinets with network and telecommunications devices,


• automation and control systems,


• monitoring and CCTV systems,


• key workstations requiring high power availability.

The most important advantages

• Power factor 1.0 — the full apparent power is equal to the active power, making the UPS ideal for powering servers, workstations, telecommunications devices and automation with high and variable power consumption.


• Wide input voltage range 80-300 V — The power supply operates stably even in systems with frequent voltage drops or surges. A wide input range reduces the need to switch to battery power, extending its lifespan.


• Programmable socket management — intelligently controlled groups of outlets allow you to set power priorities and decide which devices should be supported first.

Output power factor 1.0

Thanks to the power factor PF = 1.0 The UPS delivers a full 1000 W of active power at 1000 VA. This allows for efficient use of the power supply in high-power environments without the need to oversize the unit.

Wide input voltage range 80-300 V

The power supply operates correctly over a wide voltage range 80-300V, which is especially important in areas with unstable networks. This means it switches to battery operation less often, stabilizing the voltage and protecting connected devices.

Key features of the system

• Output power factor: 1.0 (1000VA = 1000W)


• Wide input voltage range: 80-300V


• Outputs: 8 × IEC socket


• ECO mode: energy saving mode for higher efficiency


• Generator compatible: possibility of safe operation with a power generator


• HID USB communication: when connected to a computer, it is detected as a standard UPS, with the ability to monitor status and automatically shut down the system


• EPO (Emergency Power Off) port: emergency power off with one signal in accordance with safety and fire protection procedures


• Autonomous battery modules with their own charger: each module is charged independently, which improves reliability and shortens the full charging time


• Total Current Distortion (THDi): ≤ 5% - low distortion limiting network load and interference to other devices


• Easy battery replacement: the design allows for quick removal and replacement of batteries without long system downtime


• RT version with rotating LCD: the display can be rotated depending on the mounting method (rack / tower), so the parameters are always readable

Technical specifications

• Parameters / Model: Blacktec BT RT 11 1k-C - 1000 VA / 1000 W

Entry

• Nominal voltage: 208 / 220 / 230 / 240 VAC


• Voltage range: 80 - 300 VAC


• Frequency range: 40 - 70 Hz


• Harmonics (THDi): ≤ 5% nominal input voltage


• Power factor: ≥ 0.99 at rated voltage (100% load)

Exit

• Output voltage: 208 / 220 / 230 / 240 VAC


• Voltage regulation (battery mode): ±1%


• Frequency range (synchronized): 50Hz / 60Hz


• Frequency adjustment (battery mode): 50 or 60 Hz ±0.5 Hz


• Crest Factor: 3:1 (max.)


• Harmonic distortion: ≤ 5% THD (non-linear load)


• Switching time: 0 ms (AC → battery), approx. 4 ms (inverter → bypass, typical)


• Voltage waveform (battery mode): sinusoidal (≤ 5% THD, non-linear load)

Battery

• Battery type/quantity: 12V / 9Ah × 2


• Backup time at 50% load: approx. 8 min (internal batteries)


• Backup time at 100% load: -


• Standard charging time: approx. 4 hours to 90% capacity (charging current approx. 2 A)

Dimensions and weight

• Dimensions (W x D x H): 438 × 430 × 88 mm


• Net weight (without batteries): 10.42 kg


• Net weight (with built-in battery): 14 kg


• Total number of UPS sockets: 8 × IEC C13 (4 programmable)

Control panel

• Networking: messages on the LCD display


• Battery operation: messages on the LCD display


• Malfunction: messages on the LCD display

Alarm

• Battery mode: sound every 10 seconds


• Low battery: sound every second


• Overload: sound every 0.5 seconds


• Malfunction: continuous sound

Safeguard

• Full protection: protection against short circuit, overload, discharge and overcharge

Environment

• Relative humidity: 20-90% RH @ 0-40°C (non-condensing)


• Noise: less than 45 dBA at 1 meter

Management

• Ports and connectors: EPO, RS-232, smart slot, USB, external battery connector


• SNMP / supported systems: Windows Server; Windows 7 / 8 / 10 / 11 (32 64 bit), Windows Hyper-V 2012 / 2022, Windows SBS 2011 (32 64 bit), Linux ESXi 4.x / 5.x / 6.x / 7.x / 8.x, Mac OS 10-11

Standards

• EMC: EN IEC 62040-2:2018 / EN IEC 61000-3-2:2019