Smart BatteryProtect 12/24V-100A

brands Victron Energy is an intelligent battery disconnect switch that automatically protects the battery against excessive discharge, providing optimal protection. The device disconnects unnecessary loads before the battery voltage drops to a level that could damage it, thus extending the battery's lifespan.
Thanks to the function Bluetooth, users can easily configure the device using the application VictronConnect, setting the battery disconnect and reconnect thresholds as needed. Programming is performed remotely, eliminating the need for manual wiring. Smart Battery Protect automatically adjusts to voltage 12V or 24V and also has special settings to protect lithium batteries and sensitive loads against overvoltage.
The device is equipped with technology MOSFET, which eliminates sparking when disconnecting and connecting loads, increasing installation safety. Smart Battery Protect It features low energy consumption and an alarm function that provides status information via LED or audible alarm. Delays in disconnecting and reconnecting loads allow for smooth system operation, which is useful in more demanding applications, such as converter systems.
Technical specifications:

• Model: Smart Battery Protect 12/24V 100A


• Maximum continuous load current: 100A


• Peak current (over 30 seconds): 600A


• Operating voltage range: 6 - 35V


• Power consumption with BLE enabled: 1.4 mA


• Power consumption with BLE off: 1.2 mA


• Power consumption when off or low voltage (BLE On): 0.9 mA


• Power consumption when off or low voltage (BLE Off): 0.7 mA


• Alarm output delay: 12 seconds


• Maximum load of alarm output: 50 mA (short-circuit proof)


• Load disconnect delay: 90 seconds


• Load reconnection delay: 30 seconds


• Default disconnection thresholds: 10.5V or 21V


• Default enable thresholds: 12V or 24V


• Operating temperature range: -40°C to +40°C (full load), up to 60% of nominal load at 50°C


• Degree of protection (electronics): IP67 (potted)


• Connections: IP00


• Connection type: M8


• Mounting torque: 9 Nm


• Libra: 0.5 kg


• Dimensions (H x W x D): 61 x 41 x 164 mm

is an advanced device that provides full control over the battery status, enabling safe and efficient management of power systems, both in vehicles and off-grid systems.