Residual current relay with circuit breaker, 2P, 32A, class C, 30mA, 6kA

Leakage relay with circuit breaker, 2 contacts, 32A, class C, 30mA, 6kA

• A leakage relay with a circuit breaker protects people from life-threatening electric shock and electrical circuits from short circuits, overloads and fire hazards.


• The leakage relay is used in damp rooms where the electrical installation is not reliably protected (in the bathroom, kitchen, outdoors, garage, for electric heaters, pumps, etc.).


• Safe terminal block.


• Resistance to flame, high temperatures and impacts.


• Contact position indication (red indicates that the contact is closed, green indicates that it is open).


• Note: The leakage relay must be tested regularly, at least once a month.

Technical data:

• Number of contacts: 2.


• Rated current (In): 32 A.


• Class: C.


• Nominal voltage (Ue): AC 230 V.


• Permissible leakage current: 30mA.


• Tripping time: Insulation voltage (Ui): 500 V.


• Frequency: 50/60 Hz.


• Rated short-circuit breaking capacity (Icn): 6000 A.


• Rated impulse withstand voltage (Uimp): 4000 V.


• Mechanical life: 10,000 cycles.


• Electrical life: 4000 cycles.


• Safety class: IP20.


• Connection type: cable / pin-type bus.


• Wire/busbar cross-sectional area: up to 35mm².


• Connection: from above.


• Installation: on DIN rail EN 60715 (35mm).


• Operating temperature: -25°C~+70°C.


• Dimensions: 82 x 36 x 78 mm.


• Standards: IEC 61009-1 / EN 61009-1.