Phoenix Smart IP43 Charger 24/16 (3)

Charger Phoenix Smart IP43 24V 16A (3) This innovative device is designed to efficiently charge three independent batteries. Built-in Bluetooth technology allows users to monitor and control charging settings wirelessly using a smartphone or tablet. The charger is fully programmable, allowing it to be tailored to the specific requirements of different battery types, including lithium-ion.

Three charging outputs

The Phoenix Smart IP43 24V 16A (3) offers three outputs, allowing you to charge three batteries simultaneously, each at its full rated output current. However, the total charger output current does not exceed 16A, ensuring safe and stable operation in any configuration.

Intelligent charging management

Thanks to the adaptive charging algorithm, the device automatically adjusts the absorption time to the battery's discharge level, ensuring optimal protection against overcharging. In the case of deep discharge, the charging time is extended, ensuring a full charge. In the case of minor discharges, the absorption time is shortened, speeding up the charging process.

Advanced protection

The charger is equipped with numerous safety features, including reverse polarity, short circuit, and overheating protection. The BatterySafe system automatically controls voltage increase, preventing excessive gassing, which increases safety. These features make the device ideal for use in harsh environments, such as yachts and stationary installations.

Storage mode and programmability

If the battery is not used for 24 hours, the charger automatically switches to storage mode, reducing the float voltage, minimizing corrosion and gassing. This feature also prevents battery sulfation, significantly extending battery life. The device can be remotely programmed via Bluetooth or the VE.Direct interface, giving you complete control over your charging settings.

Technical specifications

• Model: Phoenix Smart IP43 24V 16A (3)


• Input voltage: 230 VAC (range: 210 - 250 V)


• DC input voltage range: 290 - 355 VDC


• Frequency: 45 - 65 Hz


• Power factor: 0.7


• Backdrain: No AC power: < 0.1 mA


• AC power connected and charger remote control disabled: < 6 mA


• No-load power consumption: 1 W


• Efficiency: 94%


• Charging Voltage (Absorption / Preservation / Storage):
  
  
  
  • Normal: 28.8V / 27.6V / 26.4V
  
  
  • High: 29.4V / 27.6V / 26.4V
  
  
  • Lithium-ion: 28.4V / N/A / 27.0V
  
  
  
  


• Fully programmable: Yes, with Bluetooth and/or VE.Direct


• Number of battery connections: 3


• On-board battery charging current: 16 A


• Low current mode: 8 A


• Temperature compensation: -32 mV/°C


• Starter battery charging current: NO


• Loading algorithm: 6-stage adaptive (for lithium-ion batteries: 3-stage)


• Security: Battery reverse polarity, output short circuit, overheating


• Can be used as a power source: Yes, the output voltage can be set via Bluetooth and/or VE.Direct


• Operating temperature range: -20°C to 60°C (full output current up to 40°C, linear derating by 20% at 60°C)


• Humidity (non-condensing): Max 95%


• Remote on/off: Yes (2-pole connector)


• Relay (programmable): 5A to 28VDC


• Bluetooth:
  
  
  
  • Power supply: -4 dBm
  
  
  • Frequency: 2402 - 2480 MHz
  
  
  
  


• Material and color: Aluminum (blue RAL 5012)


• Battery connection: Screw terminals 16 mm² (AWG6)


• AC connection: IEC 320 C14 inlet with retaining clip (current cable to be ordered separately)


• Degree of protection: IP43 (electronic components), IP22 (connection area)


• Libra: 3.5 kg


• Dimensions: 180 x 249 x 100 mm

Charger Phoenix Smart IP43 24V 16A (3) is the perfect solution for users who need reliable charging for three batteries simultaneously, with full remote parameter control and advanced overload protection.