BatteryProtect 48V-100A

BatteryProtect 48V 100A is an advanced solution that protects your battery from harmful deep discharge. The device monitors battery voltage and automatically disconnects the load when the voltage drops below a pre-programmed threshold, protecting your battery from damage and extending its lifespan.

Intelligent Battery Protection

BatteryProtect 48V instantly disconnects non-essential loads before the battery voltage reaches a level that could compromise its integrity. This device is directional – current flows in only one direction, either from the battery to the load or from the charger to the battery, but not both.

Overload Protection

When the current exceeds the maximum safe current limit of 100A, the device immediately disconnects the load, preventing system overload and protecting both the battery and connected devices. The maximum peak current of 250A can be handled for short periods, providing additional flexibility in handling sudden load peaks.

Flexible Voltage Programming

BatteryProtect allows users to customize the voltage thresholds for disconnection and reconnection. Its simple interface allows for quick configuration, ensuring maximum efficiency and safety of the battery system in all conditions.

Low Energy Consumption

The device boasts exceptionally low current consumption – just 2 mA during operation and 1.5 mA when off or in a low-voltage cutoff state. This allows BatteryProtect to minimize battery drain, which is especially important in systems that require long-term autonomy.

High Protection in Difficult Conditions

Designed to withstand extreme conditions, the BatteryProtect 48V 100A operates flawlessly in temperatures ranging from -40°C to +40°C. With an IP67 rating, the device is completely protected against dust and water, making it ideal for use in harsh environments.

Specification:

• Model: Battery Protect 48V 100A


• Maximum continuous load current: 100A


• Peak current (30 seconds): 250A


• Operating voltage range: 24 - 64V


• Power consumption:
  
  
  
  • When on: 2 mA
  
  
  • When switched off or low voltage cut-off: 1.5 mA
  
  
  
  


• Alarm output delay: 12 seconds


• Maximum load of the alarm output: 50 mA (short circuit protection)


• Load shedding delay: 90 seconds


• Load reconnection delay: 30 seconds


• Default thresholds:
  
  
  
  • Disconnect: 42V
  
  
  • Switching on: 48V
  
  
  
  


• Operating temperature range:
  
  
  
  • Full load: -40°C to +40°C
  
  
  • 60% of nominal load at 50°C
  
  
  
  


• IP protection class:
  
  
  
  • Electronics: IP67 (potted)
  
  
  • Connections: IP00
  
  
  
  


• Connection: M8


• Mounting torque: 9 Nm


• Libra: 0.8 kg


• Dimensions (H x W x D): 62 x 123 x 120 mm

BatteryProtect 48V 100A is the perfect solution for those looking for advanced battery protection against discharge and overload, ensuring the efficiency and safety of power systems.