455W solar kit for a camper - charging two batteries and powering from an alternator
Product reference: 39-3978

A complete 455W solar kit for a campervan, allowing simultaneous charging of two batteries - a hotel battery and a starter battery - from both the photovoltaic panels and the engine alternator.

455W solar kit for a camper - charging two batteries and powering from an alternator

Product reference: 39-3978

A complete 455W solar kit for a campervan, allowing simultaneous charging of two batteries - a hotel battery and a starter battery - from both the photovoltaic panels and the engine alternator.

You have 3 products in compare list, please remove someone and try again
  • Add to favorites products
  • Added to favorites products
  • Removed to favorites product
Add to compare
428,83
Product in warehouse

Guarantee
24 month

Delivery from Europe in
5 - 8
business days

Your message has been successfully sent!
Fill in the required fields*

Camper kit with charging of 2 batteries simultaneously and from the alternator




Revolutionary dual charging with alternator and PV


The kit allows you to simultaneously charge two batteries – starter and utility – from both the solar panels and the vehicle's alternator. This means energy independence on every journey.


Advanced MPPT SRNE 30A controller with Bluetooth


Controller with PowerCatcher MPPT technology (up to 99.9% efficiency), Bluetooth support, and various battery types. Full control and monitoring via mobile app.



Main features:



  • Charging from PV and alternator simultaneously

  • Support for two batteries - starter and hotel

  • MPPT SRNE 30A controller - efficiency up to 99.9%

  • Bluetooth and RV-C for remote monitoring

  • Quiet operation - passive cooling

  • Bifacial panel with half-cell technology

  • Compatible with AGM, Gel, Lithium and Open Cell batteries

  • Multi-stage charging to extend battery life

  • Ready-to-assemble kit - includes all accessories


Advantages:



  • Dual battery support: independent starting and utility charging

  • Remote monitoring via Bluetooth: control of parameters from the phone

  • Energy independence: power anywhere

  • Charging optimization: maximum MPPT efficiency

  • Easy installation: complete set of cables and connectors

  • Resistance and durability: elements resistant to difficult conditions

  • Ecological solution: power supply without CO emissions

  • Low operating costs: free energy after installation



The set includes:




TCL 455W Solar Panel




  • Model: HSM-ND48-GR455

  • Module type: N-type TOPCon Bifacial Double Glass

  • External dimensions: 1762 x 1134 x 30 mm

  • Libra: 24.5 kg

  • Solar cells: N-type TOPCon

  • Front/Rear Glass: heat-strengthened glass 2.0 mm + 2.0 mm

  • Frame: anodized aluminum

  • Junction box: IP68, 3 bypass diodes

  • Maximum power (Pmax) [W] Front STC / BNPI: 455 / 501

  • Open Circuit Voltage (Voc) [V] Front STC / BNPI: 35.76 / 35.86

  • Short circuit current (Isc) [A] Front STC / BNPI: 16.13 / 17.71

  • Voltage at maximum power (Vmp) [V] Front STC / BNPI: 30.32 / 30.20

  • Current at maximum power (Imp) [A] Front STC / BNPI: 15.01 / 16.59

  • Module efficiency: 22.8%

  • Power tolerance: 0 / +3%

  • Maximum system voltage: 1500 V DC

  • Maximum series fuse rating: 30 A

  • Operating temperature range: from -40°C to +85°C

  • Temperature coefficient Pmax: -0.29%/°C

  • Temperature coefficient Voc: -0.25%/°C

  • Temperature coefficient Isc: +0.045%/°C

  • Bifaciality Pmax / Isc: 80% ±5%

  • Bifaciality Voc: 98% ±2%

  • Mechanical load: snow: 5400 Pa / wind: 2400 Pa

  • Bifacial Gain - Pmax Power at 5% / 10%: 478 W / 501 W

  • Bifacial Gain - Voc at 5% / 10%: 35.76V / 35.76V

  • Bifacial Gain - Isc at 5% / 10%: 16.94A / 17.74A

  • Bifacial Gain - Vmp at 5% / 10%: 30.32V / 30.32V

  • Bifacial Gain - Imp @ 5% / 10%: 15.76 A / 16.51 A


  • Temperature coefficients:

    • Nominal operating temperature of the module: 43 ±2°C

    • Temperature coefficient Isc: +0.045%/°C

    • Temperature coefficient Voc: -0.25%/°C

    • Temperature coefficient Pmax: -0.29%/°C





SRNE MPPT 30A DC-DC Charger/Regulator









Technical specifications:


Electrical characterization



  • Maximum open circuit voltage: 55Vdc

  • MPPT voltage range: 17~36Vdc

  • Maximum PV input current: 27A

  • Maximum PV input power: 400W

  • Maximum PV open circuit voltage:

    • 100V (at minimum operating temperature in the environment)

    • 92V (at 25°C ambient temperature)




Auxiliary battery



  • Battery type: Lead Acid / Li-ion / User Defined

  • Nominal battery voltage: 9~16Vdc

  • Maximum MPPT charging current: 30A

  • Maximum charging current from the alternator: 35A


Starter Battery / Alternator



  • Battery type: Lead-acid

  • Nominal battery voltage: 12/24Vdc

  • Maximum MPPT charging voltage: 13.8V

  • Maximum MPPT charging current: ≤15A

  • Maximum input voltage from a conventional alternator:

    • 13.2 16Vdc / 26.4 32Vdc



  • Maximum input voltage from alternator Euro 6 standard:

    • 12 16Vdc / 24 32Vdc



  • Alternator charging mode: Buck, Boost, Buck-Boost


Efficiency



  • MPPT tracking efficiency: > 99%

  • Maximum charge conversion efficiency: 98%


Communication



  • Built-in interfaces: TTL, Remote Switch

  • External modules: Bluetooth (with app)


General



  • Libra: 1.92kg

  • Dimensions: 221 × 175.8 × 92.4 mm

  • Degree of protection: IP32

  • Operating temperature range: -35°C ~ 65°C


Certificates



  • Security: IEC62109

  • EMS: IEC61000, FCC sDoC

  • RoHS: Yes








The SRNE MPPT 30A controller is a reliable device that provides efficient energy management in renewable energy systems, contributing to greater battery performance and longevity. It's an excellent solution for those looking for an efficient and safe way to power off-grid devices.


MC4 connectors and cabling


FlexiSun 4mm² and MC4 terminals

Offensive and promotional comments are unpublished.
Testimonials not found!
Testimonial