Porsche PCM4.1, 5.0, 6.0 reversing camera interface

Porsche PCM4.1, 5.0, 6.0 reversing camera interface The interface equips the car with a reversing camera and displays the image on the original car radio (which must be prepared for this). Some adapters are plug and play solutions, others require splicing cables or other modifications. Please read the assembly instructions in advance or contact us if you have any questions. In addition to the adapter, you need a reversing camera. We also encourage you to check out our full offer in the reversing camera tab. The video interface is suitable for Porsche Panamera from 2017 with PCM 4.1 navigation, Porsche vehicles from 2018 with PCM 5.0 navigation, Porsche vehicles from 2022 with PCM 6.0 navigation. For a 12.3 inch monitor. For connecting any two video sources, a reversing camera and a front camera. The video interface allows you to connect a reversing camera, an automatic front camera and two other video sources (e.g. USB player, DVB-T2 tuner, etc.) to the vehicle manufacturer's factory infotainment system. Product Features Video Interface for Factory Infotainment Systems 1 CVBS Rear Camera Video Input 1 CVBS Front Camera Video Input 2 Video Inputs CVBS for retrofit devices (e.g. USB player, DVB-T2 tuner, ...) Automatic switching to the rear view camera input when reverse gear is engaged Automatic front camera switching when reverse gear is engaged for 10 seconds Distance lines for the rear view camera can be activated (not available for all vehicles) PDC activation possible (not available for all vehicles) Image activation while driving (ONLY for networked video) NTSCM compatible video inputs Brand and model: Porsche Panamera (971) 2017 -> Navigation: PCM 4.1 (Harman) with 12.3 inch monitor Porsche 911 (922) 2019 -> Porsche Cayenne E3 (PO536) 2018 -> Porsche Cayenne Coupe 2019 -> Porsche Macan 2019 - > Porsche Taycan 2019 -> PCM 5.0 (Alpine) with 12.3 inch monitor Porsche 911 (922) 2022 -> Navigation: PCM 6.0 (Aptiv/Deplphi) with 12.3 inch monitor Limitations: Video only - The interface DOES NOT transmit any audio signals. The existing factory AUX audio input or FM modulator can be used to power audio signals. If 2 AV sources are connected, additional electronics are required to switch audio. Factory Rear View Camera - Automatic switch to RFK only as long as reverse gear is engaged. Additional electronics are required to delay downshifts. Aftermarket Front Camera - Switching to the front camera automatically occurs when reverse gear is disengaged for 10 seconds. It is also possible to manually switch to the front camera using the button. Distance lines and PDC - Distance line display and optical PDC display do not work on all vehicles. Video input signal - Only NTSC video sources are compatible. Connections: Image input: 4-pin HSD Electricity : open cable ends CAN bus: Plug & Play (using Quadlock) Video inputs (2x): Cinch sockets Rear Camera Input: RCA Jack Front Camera Input: RC Jack Technical Data Operating Voltage 7 ~ 25V DC Quiescent Current 8mA Current Consumption 340mA @ 12V Video Input 0.7 ~ 1V Video Input Formats NTSC Operating Temperature Range -40°C up to +85°C Video box dimensions 117 x 25 x 103 mm (W x height x depth)Legal noticeThe driver must not be distracted, directly or indirectly, by moving images while driving. In most countries/states this is prohibited by law. Apart from the fact that this product is used when stationary, it is only intended for displaying standing menus (e.g. MP3 menus from DVD players) or images from a reversing camera while driving.