Porsche pcm4.1, 5.0, 6.0 rear view camera interface

Porsche PCM4.1, 5.0, 6.0 Reversing Camera Interfacexa0The interface equips the car with a reversing camera and displays the image on the original car radio (which must be prepared for this). Some adapters are plug-and-play solutions, others require splicing cables or other modifications. Please read the installation instructions in advance or contact us with any questions.xa0In addition to the adapter, you'll need a reversing camera. We also encourage you to check out our full offer in thexa0reversing cameras tab.The video interface is suitable for Porsche Panamera from 2017 with PCM 4.1 navigation, Porsche vehicles from 2018 with PCM 5.0 navigation, Porsche vehicles from 2022 with PCM 6.0 navigation. For a 12.3-inch monitor. For connecting any two video sources, a reversing camera and a front camera.The video interface allows you to connect a reversing camera, an automatic front camera and two other video sources (e.g. USB player, DVB-T2 tuner, etc.) to the vehicle manufacturer's factory infotainment system.Product featuresVideo interface for factory infotainment systems1 CVBS reversing camera video input1 CVBS front camera video input2 CVBS video inputs for retrofit devices (e.g. USB player, DVB-T2 tuner, ...)Automatic switching to the reversing camera input when reverse gear is engagedAutomatic switching of the front camera when reverse gear is engaged for 10 secondsDistance lines for the reversing camera can be activated (not available for all vehicles)Possibility to activate PDC (not available for all vehicles)Activation of image while driving (ONLY for network-connected video)NTSC-compatible video inputsBrand and model: Porsche Panamera (971) 2017 -> Navigation:xa0PCM 4.1 (Harman) with 12.3-inch monitor Porsche 911 (922) 2019 -> Porsche Cayenne E3 (PO536) 2018 -> Porschexa0Cayenne Coupe 2019 -> Porsche Macan 2019 -> Porsche Taycan 2019 -> PCM 5.0 (Alpine) with 12.3-inch monitor xa0 Porsche 911 (922) 2022 -> Navigation: PCM 6.0 (Aptiv/Deplphi) with 12.3-inch monitorLimitations:Video onlyxa0 -xa0 The interface does NOT transmit any audio signals. The existing factory AUX audio input or FM modulator can be used to power the audio signals. If 2 AV sources are connected, additional electronics are required for audio switching. Factory Rear Cameraxa0 -xa0 Automatically switches to RFK only as long as reverse gear is engaged. Additional electronics are required to delay downshifting. Aftermarket Front Cameraxa0 -xa0 Switches to the front camera automatically after disengaging reverse gear for 10 seconds. Manual switching to the front camera is also possible using the button. Distance lines and PDCxa0 -xa0 Distance line display and optical PDC display do not work in all vehicles. Video input signalxa0 -xa0 Only NTSC video sources compatible. Connections: Image input: 4-pin HSD Electricity: open cable ends CAN bus: Plug Play (using Quadlock) Video inputs (2x): Cinch sockets Reversing camera input: RCA socket Front camera input: RCA socket Technical data Operating voltagexa0xa0 xa07 ~ 25 V DC Quiescent currentxa0xa0 xa08mA Current consumptionxa0xa0 xa0340 mA at 12 V Video inputxa0xa0 xa00.7 ~ 1 V Video input formatsxa0xa0 xa0NTSC Temperature range Operating Temperaturexa0xa0 xa0 -40°C to +85°C Video Box Dimensionsxa0xa0 xa0 117 x 25 x 103 mm (W x H x D) Legal NoticeWhile driving, do not distract the driver, directly or indirectly, with moving images. In most countries/states, this is prohibited by law. In addition to being used when stationary, this product is only intended to display standing menus (e.g. MP3 menus from DVD players) or rear view camera images while driving.