Vibrofiltr PRO 4.0 mm - damping mat 35x50cm, 1 pc.

Vibrofiltr PRO 4.0 - professional anti-vibration mat 4 mm 35 × 50 cm Vibrofilter PRO 4.0 This professional, self-adhesive anti-vibration mat is designed to effectively dampen vibrations, noise, and acoustic resonances in your car. The product is made of an advanced polymer composite, high-quality butyl rubber, and 100µm thick embossed aluminum foil. The mat is 4mm thick and has a mechanical loss factor of MLF = 0.60 It provides very high vibration dampening efficiency. This is the strongest and heaviest material in the Vibrofiltr PRO Noise Protection series, intended primarily for lower, stationary body elements, which are most susceptible to road noise transmission. Maximum vibration and noise dampening. Vibrofiltr PRO 4.0 is designed for areas requiring the highest soundproofing efficiency. Thanks to its heavy weight, 4 mm thickness, and high MLF coefficient, the mat effectively absorbs vibration energy, limits sheet metal resonance, and reduces noise from entering the cabin. The product is particularly effective on floors, wheel arches, the center tunnel, lower trunk elements, the engine compartment bulkhead, and the windshield. It can also be used to dampen heavier machinery and industrial equipment. Mat for lower and stationary body elements. Due to its heavy weight, Vibrofiltr PRO 4.0 is best used on elements made of thicker sheet metal and on stationary surfaces. This material is not intended for lightweight or moving components, where low weight is crucial. The mat can be used on its own where there is insufficient space for additional soundproofing foam or another soft insulating layer. In addition to its excellent anti-vibration properties, it also acts as an effective noise insulator. PRO Version – Strong Adhesive and Easier Installation. The PRO version is distinguished by increased initial viscosity and high final adhesion to the substrate after a self-vulcanization period. Deeper square embossing increases the material's flexibility and facilitates installation on flat, profiled, and highly curved surfaces. The mat is self-adhesive and does not require heating during standard installation. The best application comfort is achieved at temperatures above +15°C. Key Advantages of Vibrofiltr PRO 4.0

• professional anti-vibration mat, 4 mm thick,
• the highest damping efficiency in the Vibrofiltr PRO series,
• mechanical loss factor MLF = 0.60,
• strong aluminum foil 100 µm,
• very good absorption of mechanical vibrations,
• effective reduction of resonances and road noise,
• can act as an anti-vibration mat and noise isolator,
• increased initial viscosity,
• high final adhesion after self-vulcanization,
• does not require heating during installation,
• has anti-corrosion and sealing properties,
• is waterproof, self-extinguishing and non-toxic,
• does not contain bitumen, tar or asphalt,
• does not stain and does not emit unpleasant odors.

Application in the carVibrofiltr PRO 4.0 can be used, among others, on:

• car floor,
• wheel arches,
• central floor tunnel,
• lower elements of the trunk,
• engine compartment bulkhead,
• pit,
• lower fixed body elements,
• surfaces made of thicker sheet metal,
• places most susceptible to the transmission of noise and vibrations.

This product is perfect for professional soundproofing of your car, reducing road noise and improving driving comfort, especially in the lower part of the cabin. Applications outside the automotive industry: The mat can also be used to soundproof:

• heavier machines,
• industrial equipment,
• technical housings,
• metal elements exposed to resonance,
• electronics and household appliances,
• computer cases,
• air conditioning and ventilation devices.

Installation Method: Before installation, the surface should be dry, clean, and very well degreased. Cut the sheet to the appropriate shape, peel off the adhesive protective layer, and adhere the mat to the prepared surface. To achieve maximum damping effectiveness, press the material firmly against the entire surface, preferably using a roller. The mat should adhere perfectly to the substrate without air bubbles. The butyl polymer layer is self-vulcanizing, so the material's adhesion to the substrate increases over time. Basic Parameters

• Product: self-adhesive anti-vibration mat
• Model: Vibrofilter PRO 4.0
• Series: Noise Protection
• Sheet thickness: 4.0 mm +/- 0.2 mm
• Aluminum foil thickness: 0.1 mm / 100 µm
• Sheet dimensions: 350 × 500 mm
• Sheet area: 0.175 m²
• Weight and