Vibrofiltr Felt Acoustic 8 - sound-dampening acoustic felt

Vibrofiltr Felt Acoustic 8 - self-adhesive acoustic felt 8 mm Vibrofilter Felt Acoustic 8 This self-adhesive, lightweight, and flexible sound-absorbing material is made from compressed natural nonwoven fabric. The acoustic felt has a high density of 650 g/m², effectively absorbing noise and improving acoustic comfort inside the vehicle. The material works well in dry areas of the vehicle cabin. It can be installed behind carpets, upholstery elements, the headliner, dashboard, door panels, in the trunk, and on the inner wheel arches. The adhesive layer makes installation quick and easy. Effective noise absorption across a wide frequency range. The Vibrofiltr Felt Acoustic 8 acts as a sound-absorbing layer. It reduces road noise, humming, resonance, and sounds reflected from bodywork and upholstery components. This improves driving comfort, especially on longer journeys. Acoustic felt can also act as a soft spacer between upholstery elements. This helps reduce creaking, squeaking, and minor vibrations of plastic panels inside the cabin. Key benefits of the Vibrofiltr Felt Acoustic 8

• self-adhesive acoustic felt, 8 mm thick,
• pressed natural non-woven fabric with a density of 650 g/m²,
• high noise absorption capacity,
• good thermal insulation properties,
• light, soft and flexible structure,
• easy installation on flat and complex surfaces,
• good air permeability,
• increased abrasion resistance,
• non-toxic and odorless product,
• does not cause allergic reactions,
• can be used in automotive and indoor environments,
• the price is for 1 sheet 50 x 80 cm.

In-Car Use: Vibrofiltr Felt Acoustic 8 should be used in dry areas inside the cabin. The material can be installed as a second or third layer of soundproofing on bodywork and upholstery components. For best results, combine it with aluminum-butyl mat and thermo-acoustic foam. The material is recommended for areas such as:

• car floor,
• central tunnel,
• engine compartment bulkhead wall on the cabin side,
• dashboard,
• roof under the headliner,
• door panels,
• inner wheel arches,
• trunk sides,
• trunk lid,
• places behind carpets and upholstery elements.

How to install the Felt Acoustic 8 Vibrofilter? Before installation, the surface should be dry, clean, and thoroughly degreased. The felt should be applied in areas not directly exposed to water. Its flexibility allows it to adapt well to both flat surfaces and more complex shapes. Professional car soundproofing is best achieved by using a layered system. First, install an aluminum-butyl mat, which dampens vibrations and sheet metal resonances. Thermo-acoustic foam can then be added, and the Felt Acoustic 8 Vibrofilter will act as a noise-absorbing layer that reduces upholstery resonances. Material Construction: The Felt Acoustic 8 Vibrofilter is made of pressed natural nonwoven fabric with a high density of 650 g/m². The material has a soft and flexible structure, is highly breathable, and exhibits increased abrasion resistance. The felt is non-toxic, odorless, and environmentally friendly. It does not cause allergic reactions, so it can be used in cars and indoors. Technical Data

• Manufacturer / model: Vibrofilter Felt Acoustic 8
• Material type: self-adhesive acoustic felt
• Thickness: 8.0 mm
• Base material: pressed natural nonwoven fabric
• Density: 650 g/m²
• Sheet dimensions: 500 x 800 mm
• Sheet area: 0.40 m²
• Sheet weight: 0.38 kg
• Surface weight: 0.95 kg/m²
• Bulk packaging: 20 sheets / 8.0 m²
• Recommended installation temperature: from +15°C to +30°C
• Operating temperature range: from -40°C to +90°C
• Properties: noise absorption, thermal insulation, flexibility, soft structure
• Application: dry places inside the cabin, upholstery, floor, roof, trunk, wheel arches
• Production: Ukraine
• Price applies to: 1 sheet 50 x 80 cm, i.e. 0.40 m²

Why choose Vibrofiltr Felt Acoustic 8? Vibrofiltr Felt Acoustic 8 is a practical material for soundproofing car interiors. It absorbs noise well, improves thermal insulation, and helps reduce squeaking upholstery. It works well as the final layer in a car's soundproofing system. It's a good choice for floors, roofs, trunks, wheel arches, door panels, and areas behind carpets.