Vibrofiltr ECO F8 - soundproofing foam with metal foil

Vibrofiltr ECO F8 - metallized thermo-acoustic mat 8 mm Vibrofilter ECO F8 This self-adhesive, ultra-lightweight thermo-acoustic mat is made of foamed polyethylene and reinforced with a metal foil. The metalized layer reflects thermal radiation and improves the material's acoustic properties. This makes the mat an effective thermo-acoustic barrier in cars. The material has a structure of closed cells of varying sizes. This structure limits the transfer of noise and heat, while also preventing moisture absorption. The ECO F8 Vibrofilter can be used in the car cabin and on flat body parts, including in areas with elevated temperatures, such as the engine compartment lid. Thermal and acoustic insulation with a metal foil. The ECO F8 Vibrofilter acts as a lightweight insulating barrier. The mat reduces the transfer of road noise, wheel noise, and mechanical sounds. It also helps reduce the heat buildup in the car interior in summer and slows the cooling of the cabin in winter. The metal foil reflects thermal radiation, making the material suitable for use in areas exposed to higher temperatures. The best effect is achieved after installation as a second layer on a previously glued aluminum-butyl mat. The most important advantages of Vibrofiltr ECO F8

• self-adhesive thermo-acoustic mat, 8 mm thick,
• reinforcement with heat-reflecting metal foil,
• lightweight construction made of foamed polyethylene,
• closed cells of various sizes,
• good thermal insulation of the car cabin,
• low noise transmission,
• waterproof and oil-resistant material,
• does not absorb moisture,
• non-toxic and odorless product,
• operating range from -40°C to +100°C,
• can be mounted on the engine compartment lid,
• the price is for 1 sheet 50 x 75 cm.

Car Application: The ECO F8 Vibrofilter can be used on flat and simple body surfaces. Due to its limited flexibility, the mat performs best where the surface does not have sharp embossments or sharp bends. The material is recommended for areas such as:

• engine compartment flap,
• engine compartment bulkhead wall,
• door,
• trunk,
• roof,
• floor,
• fenders,
• trunk lid,
• flat body elements hidden under the upholstery.

How to install the ECO F8 Vibrofilter? Before installation, the surface should be clean, dry, and thoroughly degreased. The mat should be applied to flat or simple body parts. The material works best as a second layer, glued over a previously installed aluminum-butyl mat. A layered system provides the best results. The first aluminum-butyl layer dampens vibrations and resonances of the sheet metal. The ECO F8 Vibrofilter creates a second layer that insulates heat and reduces noise transmission into the vehicle interior. Material Construction: The ECO F8 Vibrofilter is made of expanded polyethylene with a closed-cell structure. The material does not absorb moisture, is waterproof, oil-resistant, and will not degrade under the influence of weather conditions for many years. The outer metal foil improves thermal insulation and supports acoustic performance. The mat can be used in automotive applications and indoors. Technical Data

• Model: Vibrofilter ECO F8
• Material type: metallized thermo-acoustic mat
• Thickness: 8.0 mm
• Base material: foamed polyethylene, metal foil
• Structure: closed cells of various sizes
• Thermal conductivity: 0.037 W/m²
• Sheet dimensions: 500 x 750 mm
• Sheet area: 0.375 m²
• Sheet weight: 0.14 kg
• Surface weight: 0.38 kg/m²
• Bulk packaging: 20 sheets / 7.50 m²
• Recommended installation temperature: from +15°C to +30°C
• Operating temperature range: from -40°C to +100°C
• Resistance: water, oil, moisture and weather conditions
• Color / Finish: metallized layer
• Production: Ukraine
• Price applies to: 1 sheet 50 x 75 cm, i.e. 0.375 m²

Why choose the ECO F8 Vibrofilter? The ECO F8 Vibrofilter is a good choice when you need a lightweight mat that isolates noise and heat. The metal foil reflects heat, while the foamed polyethylene reduces noise penetration into the vehicle interior. This material works well as a second layer in a vehicle's soundproofing system. Combined with an aluminum-butyl mat, it improves driving comfort, reduces road noise, and supports the cabin's thermal insulation. It's a practical solution for hoods, bulkheads, roofs, floors, doors, trunks, and flat body panels.