Vibrofiltr ECO 8 - silencing and noise-insulating foam

Vibrofiltr ECO 8 - self-adhesive thermo-acoustic mat 8 mm Vibrofilter ECO 8 This self-adhesive, ultra-lightweight thermo-acoustic mat is made of foamed polyethylene. The material creates an effective thermal and acoustic barrier, helping to reduce the penetration of road noise, wheel noise, mechanical sounds, and temperature into the vehicle interior. The mat has a closed-cell structure of varying sizes. This means it doesn't absorb moisture, is water and oil resistant, and also works well as a second layer of soundproofing after installing an aluminum-butyl mat. The lightweight acoustic and thermal insulation of the ECO 8 Vibrofilter reduces excessive cabin heating in summer and slows down interior cooling in winter. It also blocks the penetration of external noise, particularly from the floor, doors, trunk, roof, and flat body parts. Its 8mm thickness provides a stronger insulating layer than the thinner 4mm version. It works best on flat or simple surfaces. For sharp curves and strong embossments, a better solution may be to use two layers of thinner Vibrofiltr ECO 4 foam. The most important advantages of Vibrofiltr ECO 8

• self-adhesive thermo-acoustic mat, 8 mm thick,
• very light construction made of foamed polyethylene,
• closed cells of various sizes,
• good thermal insulation of the car cabin,
• effective reduction of road noise transmission,
• waterproof and oil-resistant material,
• does not absorb moisture,
• non-toxic and odorless product,
• a good choice for flat body parts,
• recommended as a second layer on an aluminum-butyl mat,
• the price is for 1 sheet 50 x 75 cm.

In-car use: Vibrofilter ECO 8 can be used inside a vehicle as a noise and temperature insulating layer. The best results are achieved when installed on a pre-glued aluminum-butyl mat, which dampens vibrations and sheet metal resonances. This material is recommended for areas such as:

• flat surfaces of the interior of the door,
• trunk,
• roof,
• floor,
• fenders,
• trunk lid,
• surfaces under carpets,
• places behind plastic panels,
• body elements hidden behind the upholstery.

How to install Vibrofiltr ECO 8? Before installation, the surface should be dry, clean, and thoroughly degreased. The mat should be applied to flat or simple body parts. Due to its 8 mm thickness, it is worth checking the space available under the carpet, panel, or upholstery beforehand. For best results, apply a layered system. First, install an aluminum-butyl mat, which dampens sheet metal vibrations. Then, apply Vibrofiltr ECO 8 as a second layer, which insulates noise and temperature. For surfaces with sharp curves or strong embossments, consider using the thinner Vibrofiltr ECO 4 foam in two layers. This installation can facilitate the material's adaptation to the surface's shape. Material Construction: Vibrofiltr ECO 8 is made of closed-cell polyethylene foam. The material does not absorb moisture, making it suitable for under carpets and in areas where water and oil resistance are important. The mat is lightweight, odorless, non-toxic, and weather-resistant. It can be used in the automotive industry, indoors, and in the housings of industrial machines and equipment. Technical data

• Model: Vibrofilter ECO 8
• Material type: self-adhesive thermo-acoustic mat
• Thickness: 8.0 mm
• Base material: foamed polyethylene
• Structure: closed cells of various sizes
• Thermal conductivity: 0.037-0.040 W/m²
• Sheet dimensions: 500 x 750 mm
• Sheet area: 0.375 m²
• Sheet weight: 0.12 kg
• Surface weight: 0.31 kg/m²
• Bulk packaging: 20 sheets / 7.50 m²
• Recommended installation temperature: from +15°C to +30°C
• Operating temperature range: from -40°C to +80°C
• Resistance: water, oil, moisture and weather conditions
• Production: Ukraine
• Price applies to: 1 sheet 50 x 75 cm, i.e. 0.375 m²

Why choose Vibrofiltr ECO 8? Vibrofiltr ECO 8 is a good choice when you need a lightweight, affordable, and thicker thermo-acoustic mat. The material helps reduce road noise, improves cabin thermal insulation, and does not absorb moisture. Combined with an aluminum-butyl mat, it creates an effective vehicle soundproofing system. The first layer dampens sheet metal vibrations, while Vibrofiltr ECO 8 isolates noise and temperature. It's a practical solution for doors, roofs, and