CTK WaveFix PRO 15 - Premium sound-absorbing foam

CTK WaveFix PRO 15 Ocean - Premium sound-absorbing mat with strong adhesive CTK WaveFix PRO 15 Ocean This premium self-adhesive sound-absorbing mat is designed to effectively soundproof car interiors. The material absorbs noise in the mid- and high-frequency range, helping to reduce hums, whistling, resonances, and sounds originating behind upholstery elements. The foam is made of specialized expanded polyurethane with a shape memory effect. The PRO Ocean version features improved impregnation and a reinforced adhesive layer with increased viscosity. The adhesive is additionally mechanically reinforced with a textile mesh, ensuring the mat adheres well even to surfaces with more complex shapes. Reinforced adhesive layer. The CTK WaveFix PRO 15 Ocean differs from the basic WaveFix 15 version with a stronger adhesive layer. Increased adhesion facilitates installation on embossed areas, curves, and irregular surfaces. This makes the mat suitable for use behind door panels, near pillars, under the headliner, in the trunk, and in other places where regular foam might not adhere well to the floor. Effective Noise Absorption: The CTK WaveFix PRO 15 Ocean has a 7/15 mm thick wave-like structure. The wave-like profiling increases the active sound-absorbing surface, making the mat more effective in absorbing sound than standard flat-surface materials. The porous foam structure consists of open and partially closed cells. Open cells absorb sound within the material, while partially closed cells help reduce noise and heat transfer. This allows the mat to act as both a sound-absorbing and insulating material. Shape Memory Effect: The CTK WaveFix PRO 15 Ocean foam slowly returns to its original shape after compression, effectively filling gaps between bodywork and upholstery components. It doesn't force plastic panels too much, reducing the risk of them deforming or slipping out of their mounts. The material also acts as a soft, shock-absorbing spacer. It helps reduce cracking, creaking, and resonance from plastic cabin components such as door panels, pillars, headliner, cockpit, center tunnel console, and trunk lid trim. Key benefits of the CTK WaveFix PRO 15 Ocean

• Premium sound-absorbing mat,
• reinforced adhesive layer with increased viscosity,
• mechanical reinforcement of the adhesive with a textile mesh,
• very good noise absorption in medium and high frequencies,
• wave-type profiling increasing the sound-absorbing surface,
• polyurethane with shape memory effect,
• reduction of noise, whistling, crackling and upholstery resonances,
• easy installation on flat and irregular surfaces,
• resistance to air moisture and UV radiation,
• non-toxic, odorless and safe for health,
• large sheet 100 x 75 cm with an area of 0.75 m².

In-Vehicle Applications: CTK WaveFix PRO 15 Ocean is designed for installation in dry areas inside the vehicle. It works best behind upholstery panels and between body and interior elements. It can be used as the final acoustic layer in a professional vehicle soundproofing system. The material can be installed on surfaces such as:

• the back side of the door panels,
• A, B and C pillar covers,
• roof behind the headliner,
• dashboard elements,
• center tunnel console,
• engine bulkhead on the cabin side,
• rear inner wheel arches,
• trunk sides,
• rear fender area,
• trunk lid upholstery.

How to install CTK WaveFix PRO 15 Ocean? When soundproofing metal bodywork, the CTK WaveFix PRO 15 Ocean mat is best installed as the final acoustic layer. First, apply an aluminum-butyl anti-vibration mat to dampen sheet metal vibrations. Then, add thermo-acoustic foam, and finally, install WaveFix PRO 15 as a noise-absorbing layer. Before installation, the surface should be dry, clean, and degreased. The mat is self-adhesive, making application quick and easy. The material can be cut to the required shape with a utility knife or scissors. Technical Data

• Producer: CTK
• Model: WaveFix PRO 15 Ocean
• Material type: Premium self-adhesive sound-absorbing mat
• Thickness: wave 7/15 mm
• Base material: specialized polyurethane with shape memory effect
• Impregnation: sound-absorbing preparation with an improved formula
• Adhesive layer: increased viscosity, increased adhesion, reinforced with textile mesh
• Structure: open and partially closed cells
• Sheet dimensions: 1000