Ctk wavefix 15 - premium soundproofing foam

CTK WaveFix 15 - Premium sound-absorbing mat 7/15 mm CTK WaveFix 15 This self-adhesive, very soft, and flexible premium sound-absorbing mat is made of specialized shape-memory polyurethane impregnated with a sound-absorbing agent. This effectively absorbs noise, reducing hums, whistles, and resonances from car upholstery components. The wave-like profiling increases the active sound-absorbing surface. As a result, CTK WaveFix 15 is more effective than many standard foams with a flat surface and similar thickness. The material works best in the frequency range above 700 Hz, but noise reduction begins at around 100 Hz. Professional sound absorption in cars: CTK WaveFix 15 combines the properties of a sound-absorbing and insulating material. Open cells absorb sound within the porous structure, while partially closed cells help reduce noise and heat transfer. This makes the mat a perfect final acoustic layer for professional car soundproofing. The material is ideal for installation behind door panels, the headliner, pillars, behind the dashboard, in the trunk, and around the rear wheel arches. It can be used anywhere where noises, whistling, cracking, creaking, or resonance from plastic panels occur. The soft CTK WaveFix 15 memory foam has a shape memory effect. When compressed, the material slowly returns to its original shape. It expands gently and with little force, thus thoroughly filling the empty spaces between the upholstery and body parts. Thanks to this structure, the mat does not push out door panels, covers, or latches. It also acts as a soft, cushioning spacer. It reduces friction between surfaces, reducing buzzing, creaking, and cracking sounds inside the cabin. Key advantages of CTK WaveFix 15

• Premium self-adhesive sound-absorbing mat,
• wave profiling 7/15 mm,
• specialized polyurethane with shape memory,
• sound-absorbing impregnation that improves acoustic properties,
• sound absorption up to 85%,
• highest efficiency above 700 Hz,
• noise reduction starts from around 100 Hz,
• very soft and flexible structure,
• easy installation on flat and irregular surfaces,
• reduction of noise, whistling, crackling and upholstery resonances,
• can act as light thermal insulation in dry places,
• the price is for 1 sheet 50 x 40 cm.

In-car use: CTK WaveFix 15 should be used in dry areas inside the cabin. The material is installed behind panels, covers, and upholstery elements. For metal body parts, it is best used as the final acoustic layer, after installing an aluminum-butyl mat and optional thermo-acoustic foam. The mat can be used for applications such as:

• on the back of the door panels,
• behind the A, B and C pillar covers,
• on the roof behind the headliner,
• behind the dashboard,
• at the center tunnel console,
• on the bulkhead wall on the cabin side,
• on the rear inner wheel arches,
• behind the trunk sides,
• in the area of the rear fenders,
• between upholstery panels and body elements.

This isn't just any technical foam. CTK WaveFix 15 isn't your standard acoustic foam or your typical low-density technical foam. It's a specialized premium sound-absorbing material designed to effectively soundproof a car's interior. Compared to standard foam, CTK WaveFix 15 absorbs sound better, adapts more effectively to the space, and doesn't cause excessive stress on upholstery elements. How do you install CTK WaveFix 15? Before installation, the surface should be dry, clean, and degreased. The mat should be applied in dry areas that are not directly exposed to water. The material adapts well to flat, slightly irregular, and more complex surfaces. When soundproofing metal body parts, it's recommended to use a layered system. First, apply an aluminum-butyl mat, which dampens sheet metal vibrations. Then, add thermo-acoustic foam. CTK WaveFix 15 is best installed as a final layer, which absorbs noise and reduces upholstery resonances. Technical Data

• Producer: CTK
• Model: WaveFix 15
• Material type: self-adhesive sound-absorbing foam mat
• Class: Premium
• Base material: specialized polyurethane with shape memory
• Impregnation: sound-absorbing preparation
• Structure: a combination of open and partially closed cells
• Profiling: wave
• Grub