CTK Standard SpeakerKit - for damping door panels

CTK Standard SpeakerKit - set of 2 mm loudspeaker soundproofing mats / 4 sheets CTK Standard SpeakerKit This is an economical set of anti-vibration mats designed for basic soundproofing of car doors where speakers are mounted. The set consists of: 4 sheets of CTK Standard Professional 2.0 mats about dimensions 250 × 250 mm, which gives a total area 0.25 m² This kit was created for those who want to easily reduce sheet metal vibrations near the speakers and improve the basic sound quality of their audio system. The mats dampen resonances in the metal door elements and partially reduce upholstery vibrations, resulting in cleaner, more dynamic, and less distorted sound. Basic soundproofing for car speakers. During operation, the sheet metal and upholstery elements can vibrate. This causes unwanted resonances, reduced sound dynamics, rumbling, and distortion. The CTK Standard SpeakerKit helps reduce this problem by locally damping the surfaces under and directly behind the speaker. The kit can be used to dampen mounting points when 4 speakers, using one sheet for each point. However, for better results, it is recommended to use 2 sheets per speaker - one sheet directly adjacent to the mounting location, and the other behind the speaker or on a larger surface of the door sheet metal. Cost-effective car audio sound improvement. The CTK Standard SpeakerKit is a good solution for basic upgrades to a factory or basic car audio system. The mat reduces vibrations and resonances around the speaker, allowing for a more orderly sound and more stable speaker operation. Damping the speaker mounting area helps reduce acoustic energy loss caused by resonating sheet metal. This allows music to sound cleaner, with better control and less unwanted door noise. Important information about the CTK Standard SpeakerKit's performance. basic level of soundproofing This is an economical and targeted solution that improves the speaker's operating conditions to a limited extent. This type of kit does not replace professional soundproofing of entire car doors. The best results in car audio are achieved only after comprehensive soundproofing of the outer and inner door panels, closing the process openings, and using additional foams or insulating materials. SpeakerKit should be considered a minimum, allowing you to begin soundproofing the doors and improve the basic operating conditions of the speakers. CTK Standard Professional 2.0 Mat. The kit includes mats. CTK Standard Professional 2.0 This self-adhesive vibration dampening material is made of a high-tech composite of butyl rubber and specialized high-viscosity polymers. The butyl-polymer layer is reinforced with a 100% thick aluminum foil. 100 µm The film increases the material's stiffness, improves surface stability, and helps dampen vibrations. The mat is free of bitumen, tar, or asphalt, so it doesn't emit unpleasant odors and can be used in automotive applications and indoors. High adhesion and durable bond: CTK Standard Professional mats have high initial adhesion to the substrate. After several or several dozen hours of installation, the bond strength increases thanks to the self-vulcanizing properties of the butyl layer. This means that when properly applied and firmly pressed, the mat creates a stable bond with the sheet metal. This makes it ideal for car doors, where fluctuating temperatures, moisture, vibrations, and frequent door opening and closing occur. CTK Standard SpeakerKit Applications: The CTK Standard SpeakerKit can be used for, among other things:

• spot soundproofing of car doors,
• sheet metal damping at the loudspeaker mounting location,
• soundproofing the surface directly behind the loudspeaker,
• limiting the resonance of upholstery elements,
• improving the basic operation of door speakers,
• reduction of vibrations and oscillations in the area of the speaker basket,
• economical upgrade of the factory audio system.

The product is especially useful when we don't plan to completely soundproof the entire door, but we want to improve the working conditions of the speakers in a simple and inexpensive way. The most important advantages of the CTK Standard SpeakerKit

• a set designed for soundproofing speaker mounting locations,
• 4 sheets of CTK Standard Professional 2.0 mats,
• economic improvement of loudspeaker operating conditions,
• reduction of sheet metal vibrations under and behind the loudspeaker,
• limiting door and upholstery resonances,
• 100 µm thick aluminum foil,
• self-adhesive butyl polymer layer,
• high initial adhesion to the substrate,
• still strong