CTK Electro 3.0 - lightweight damping mat 37x50cm, 1 pc.

CTK Electro 3.0 - lightweight anti-vibration mat for electric cars 3 mm 37 × 50 cm CTK Electro 3.0 is a high-quality, lightweight anti-vibration mat designed to effectively dampen vibrations, noise, and acoustic resonances of car body components. The product was designed specifically for electric cars, hybrid cars and modern vehicles, where it is important to achieve high soundproofing efficiency with the lowest possible weight of the materials used. The price refers to 1 sheet measuring 370 × 500 mm, That is 0.185 m² The mat is thick 3.0 mm, and its aluminum reinforcing layer has a thickness 100 µm, which improves the material's stiffness and vibration damping effectiveness. CTK Electro 3.0 is one of CTK's most advanced soundproofing materials. It is made from an innovative composite of high-quality butyl rubber, specialized polymers, and aluminum foil. This combines excellent performance, flexible installation, high adhesion to the substrate, and low weight for the resulting effect. Soundproofing mat for electric and hybrid cars. In electric and hybrid cars, combustion engine noise is reduced or completely eliminated. This makes other sounds, such as tire noise, road noise, suspension operation, body resonances, plastic vibrations, and noises coming from the wheel arches, floor, trunk, and doors, more audible. CTK Electro 3.0 helps reduce these unwanted sounds by effectively dampening vibrations in the vehicle's metal and plastic components. The material reduces the amplitude of vibrations, limits bodywork resonances, and improves acoustic comfort inside the car. Thanks to its low weight, the mat is especially recommended for applications where you don't want to overload the vehicle, but at the same time want a real soundproofing effect. High damping efficiency - MLF = 0.56. One of the most important parameters of anti-vibration mats is the mechanical loss factor. MLF It determines the material's ability to absorb vibration energy. The higher the MLF value, the more effectively the mat dampens vibrations and resonances. CTK Electro 3.0 achieves a very high value. MLF = 0.56, which means effective performance while maintaining a reasonable material weight. This makes the product suitable not only for electric cars, but also for classic combustion vehicles, delivery vans, premium cars, and car audio systems. The mat can be used as the first layer of soundproofing, designed to dampen vibrations in sheet metal, plastics, and upholstery elements. Insulating foams, sound-absorbing materials, or acoustic membranes can then be applied to the prepared surface. Strong 100 µm aluminum foil. The CTK Electro 3.0 has an aluminum foil with a thickness of 100 micrometers, or 0.1 mm. This is an important structural element of the mat, as it increases the material's stiffness, improves surface stability, and aids in vibration dampening. Thicker aluminum foil is particularly useful when soundproofing car doors, where the mat can be used to reinforce the sheet metal surface and reduce resonances in speaker locations. A well-pressed mat improves the stability of door components, which can positively impact the sound quality of the car audio system. Lightweight construction and excellent adhesion: CTK Electro 3.0 is distinguished by its low weight relative to its effectiveness. One sheet weighs approximately 0.72 kg, and the surface weight of the material is 3.89 kg/m² This allows the mat to be used on larger vehicle surfaces without excessively increasing the vehicle's weight. The adhesive layer, based on butyl rubber and specialized polymers, ensures high initial adhesion to the substrate. After several or several dozen hours of installation, adhesion further increases thanks to the self-vulcanization process. This means that over time, the mat creates an even stronger and more stable bond with the surface. Using CTK Electro 3.0 in a car: CTK Electro 3.0 can be used on many vehicle body and interior components. The product is suitable for both partial soundproofing of selected areas and for more comprehensive soundproofing of the car. Common applications:

• car doors,
• trunk,
• roof,
• floor,
• outer wheel arches,
• inner wheel arches,
• fenders,
• hood,
• trunk lid,
• metal body parts,
• plastic interior elements,
• upholstery elements susceptible to resonance.

The mat is also suitable for soundproofing cars after bodywork repairs, restoring factory insulation, and upgrading car audio systems. Perfect for car audio installations.