Acoustic felt 10 - self-adhesive soundproofing mat

Acoustic felt 10 mm - self-adhesive soundproofing mat Acoustic felt 10 mm This self-adhesive, very lightweight, and flexible soundproofing material is made from a high-density, pressed natural nonwoven fabric. The mat effectively absorbs noise across a wide frequency range and also improves the thermal insulation of the car interior. The material performs well in dry areas inside the vehicle cabin. It can be used behind carpets, upholstery elements, the headliner, under the dashboard, in the trunk, and on the inner wheel arches. The adhesive layer makes installation quick and easy. Effective noise absorption in the car cabin. 10 mm acoustic felt acts as a sound-absorbing layer. It helps reduce road noise, humming, resonance, and sounds reflected from body and upholstery components. Soundproofing with this material improves driving comfort, especially on the road and at higher speeds. Thanks to its fibrous structure, the felt effectively absorbs sound and can also act as a soft spacer between upholstery elements. This reduces creaking, squeaking, and minor vibrations of plastic panels. Key advantages of 10 mm acoustic felt

• self-adhesive soundproofing mat, 10 mm thick,
• pressed natural nonwoven fabric of high density,
• high noise absorption capacity,
• good thermal insulation of the vehicle interior,
• very light, soft and flexible structure,
• easy installation on flat and irregular surfaces,
• good air permeability,
• increased abrasion resistance,
• non-toxic and odorless product,
• does not cause allergic reactions,
• can be used in automotive and indoor environments,
• the price is for 1 sheet 50 x 80 cm.

In-Car Use: 10mm acoustic felt should be installed in dry areas inside the cabin. The material can be used as a second or third layer of soundproofing on bodywork and upholstery components. For best results, combine it with aluminum-butyl mat and thermo-acoustic foam. The material is recommended for areas such as:

• car floor,
• central tunnel,
• engine compartment bulkhead wall on the cabin side,
• dashboard,
• roof under the headliner,
• door panels,
• inner wheel arches,
• trunk sides,
• trunk lid,
• places behind carpets and upholstery elements.

How to install acoustic felt? Before installation, the surface should be dry, clean, and thoroughly degreased. The felt should be applied in areas not exposed to direct contact with water. Its flexibility allows the material to adapt well to both flat and more complex surfaces. Professional car soundproofing is best achieved by using a layered system. First, apply an aluminum-butyl mat, which dampens vibrations and sheet metal resonances. Thermo-acoustic foam can then be applied, and the 10 mm acoustic felt can be used as a sound-absorbing layer to reduce noise inside the cabin. Material Construction: The acoustic felt is made of pressed natural nonwoven fabric with a density of 1300 g/m². The material has a soft, flexible structure and is highly breathable. This effectively absorbs sound and improves acoustic comfort in the vehicle interior. The product is non-toxic, odorless, and environmentally friendly. It can be used in cars and indoor spaces. Technical Data

• Material type: self-adhesive acoustic felt
• Thickness: 10.0 mm
• Base material: pressed natural nonwoven fabric
• Density: 1300 g/m²
• Sheet dimensions: 500 x 800 mm
• Sheet area: 0.40 m²
• Sheet weight: 0.62 kg
• Surface weight: 1.55 kg/m²
• Bulk packaging: 9 sheets / 3.6 m²
• Recommended installation temperature: from +15°C to +30°C
• Operating temperature range: from -40°C to +90°C
• Properties: noise absorption, thermal insulation, flexibility, soft structure
• Application: dry places inside the cabin, upholstery, floor, roof, trunk, wheel arches
• Price applies to: 1 sheet 50 x 80 cm, i.e. 0.40 m²

Why choose 10mm acoustic felt? 10mm acoustic felt is a practical material for soundproofing a car's interior. It absorbs noise effectively, improves driving comfort, and can reduce squeaking upholstery. It works well as a final layer in a car's soundproofing system. It's a good choice for floors, roofs, trunks, wheel arches, door panels, and areas behind carpets. Thanks to its self-adhesive backing, the material can be quickly installed without additional glue.