Sharkoon TG6M RGB

Sharkoon TG6M RGB. Form factor: Tower, Type: PC, Product colour: Black. Power supply location: Bottom. Front fans installed: 3x 120 mm, Front fans diameters supported: 120 mm, Rear fans installed: 1x 120 mm. Supported HDD sizes: 2.5,3.5". Width: 215 mm, Depth: 452 mm, Height: 465 mm

As a variant of the TG6 RGB, the TG6M RGB not only offers improved airflow thanks to the mesh front panel, but it is also the ideal showroom for all hardware enthusiasts. Accordingly, the tempered glass side panel offers the ideal window for showcasing the built-in hardware. Three 120 mm RGB LED fans behind the front panel and a 120 mm RGB LED fan at the rear of the case allow the hardware components to be seen in a new light. The clever interior design, on the other hand, keeps unsightly elements out of view.

Effective Cooling. So that the TG6M RGB does not work up a sweat even during continuous operation, the case has a variety of cooling options. Above all, the extensive mesh grille, which covers the front side of the case, will ensure an optimal airflow. Located behind the grille are three addressable 120 mm RGB LED fans which maintain the airflow and give the front of the case its radiant look. The side panel made of tempered glass offers a deep insight into the interior, serving as a showcase for the installed hardware. At the same time, the fourth 120 mm RGB LED fan at the rear of the case illuminates the built-in components with colorful tones.

Atmospheric RGB Illumination. The lighting of the TG6M RGB can be customized for all tastes via mainboards with a 5V-D-coded-G header. Should the mainboard not have the appropriate connection, manual color settings with preset lighting effects are also possible using the case's own controls.

Adaptive Coolness. Since there is also space for high-performance hardware in the TG6M RGB, the case is already equipped with an efficient cooling system as standard. If desired, the TG6M RGB offers a variety of possibilities to increase the cooling performance even further and thus to fully exploit the case's hardware potential. For just a radiator, without fans, the front of the case offers considerable room - with an installation height up to 5.2 cm. This is due to the three pre-installed front fans being secured to the front of the chassis and operating directly between the front panel and fan tray. The fan tray can be removed together with the fans, facilitating the installation of a radiator up to 360 mm in length.

Generously Dimensioned Inside. The most modern hardware not only needs the appropriate cooling capacity, but it also requires sufficient space to be accommodated. Therefore, graphics cards with a length of up to 40 cm can easily find room in the casing, as well as CPU coolers with a maximum height of 16.7 cm. Power supplies with a length of up to 20.5 cm will also have enough space. In order to have enough data storage capacity, the TG6M RGB can also accommodate three 3.5" hard drives or up to four 2.5" SSDs.

Tidy Interior. To ensure that the TG6M RGB always looks tidy, the case offers numerous cable pass-throughs for the proper cabling of all components. There is also a power supply tunnel, behind which troublesome cables can be hidden. In addition, all air inlets are protected by detachable dust filters. Extra-long slots ensure that most fans and storage drives can be positioned with flexibility, making the creative installation of components as easy as possible.

Design

Form factor: Tower
Type: PC
Product colour: Black
Supported motherboard form factors: ATX, micro ATX, Mini-ITX
Number of 3.5" bays: 3
Number of 2.5" bays: 4
Number of expansion slots: 7
Feature: Side window
Suitable for: Gaming
Feature: Illumination
Illumination colour: Multi
Illumination location: Case fans
Feature: Tempered glass panel(s)
Feature: Cable management
Feature: On/off button
Maximum CPU cooler height: 16.7 cm
Maximum graphics card length: 40 cm
Maximum PSU length: 20.5 cm

Power supply

Power supply location: Bottom

Ports & interfaces

Audio input: Yes
USB 2.0 ports quantity: 2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity: 2

Cooling

Front fans installed: 3x 120 mm
Number of front fans supported (max): 3
Front fans diameters supported: 120 mm
Rear fans installed: 1x 120 mm
Rear fans diameters supported: 120 mm
Number of top fans supported (max): 3
Top fans diameters supported: 120,140 mm

Storage

Supported HDD sizes: 2.5,3.5"

Weight & dimensions

Width: 215 mm
Depth: 452 mm
Height: 465 mm
Weight: 7.9 kg

Logistics data

Harmonized System (HS) code: 84733080